College practice · Worked answers
Free body diagram practice
A free-body diagram is a list of interactions drawn as arrows on one chosen object. In college physics, the difficult part is often deciding which arrows belong before writing ΣF = ma. Start by naming the object, then name what touches it and what pulls on it from a distance.
Choose the object and name its interactions
- Choose one system. A block, an elevator passenger, or a hanging mass can be your object.
- List external interactions. Earth gives weight; a surface can give a normal force and friction; a taut rope can give tension.
- Draw directions. Weight points down near Earth’s surface, the normal is perpendicular to the contact surface, and tension pulls along the rope.
- Choose axes. Resolve force components if useful. Do not count a force and its components as separate forces.
- Write one equation per axis. The sum of force components equals mass times acceleration along that axis.
Velocity is not a force. Neither is ma an extra arrow to add to the diagram. Newton’s third-law partner acts on the other object, so it belongs on a different diagram.
A sliding block after the push ends
A block slides right on a rough, level table after the hand has let go. The only external forces in this model are the table’s upward normal force, Earth’s downward weight, and leftward kinetic friction. Motion to the right does not require a continuing rightward force.
| Direction | Force on the block |
|---|---|
| ↑ Up | Normal force from the table |
| ↓ Down | Weight from Earth |
| ← Left | Kinetic friction from the table |
| → Right | No force after the hand loses contact |
Normal force is not always mg
On a level table with no vertical acceleration and no other vertical force, N = mg. On a frictionless incline at angle θ, with no other force perpendicular to the incline, N = mg cos θ. In an accelerating elevator, N can differ from mg. Use the perpendicular or vertical force equation to decide.
Static friction adjusts up to its maximum μₛN; it is not always at that maximum. Kinetic friction in the simple sliding model has magnitude μₖN and opposes the relative sliding at the contact.
Putting friction on a ramp? See inclined plane problems with friction.
Work through two examples
A block slows down on a table
- A 4 kg block slides right on a horizontal surface. The hand is no longer touching it. Let μₖ = 0.20 and g = 9.8 m/s²; assume no vertical acceleration.
- The diagram has N up, mg down, and friction left. N = mg = 39.2 N, so friction is 0.20 × 39.2 = 7.84 N left.
- With right positive, ΣFₓ = −7.84 = 4aₓ, so aₓ = −1.96 m/s². A rightward velocity and leftward acceleration are consistent with slowing.
A passenger accelerates upward
- A 60 kg passenger stands on an elevator floor accelerating upward at 2 m/s². Use g = 9.8 m/s².
- The passenger’s diagram has only N upward and mg downward in this model. Upward positive gives N − mg = ma.
- Thus N = 60(9.8 + 2) = 708 N. Weight remains 588 N; the normal force changes with acceleration.
Try it yourself
Choose an answer, then check your reasoning. You can retry any question or open its solution.
Show solution 1
Weight down and normal up. Earth exerts weight on the book and the desk exerts a normal force on it. The book’s force on the desk acts on a different object.
Why the other choices are wrong:
- Weight down and the book’s force on the desk: The book’s push on the desk acts on the desk, so it goes on the desk’s diagram.
- Normal up and a separate ma force: ma isn’t a force; it is the result of the net force. And the book’s weight is missing.
- Weight down only: With only weight, the book would accelerate downward. The desk pushes up on it.
Show solution 2
Only weight. After contact ends, the hand no longer exerts a launch force. In the stated model, gravity is the only force.
Why the other choices are wrong:
- A forward launch force: The hand stopped touching the ball, so it no longer pushes it.
- Weight and upward velocity: Velocity describes motion. It isn’t a force.
- No forces, since it is in the air: Earth still pulls on the ball. Gravity acts without contact.
Show solution 3
Left. Kinetic friction opposes the block’s relative sliding across the floor, so it points left.
Why the other choices are wrong:
- Right: Friction opposes the sliding, and the block slides right.
- Up: Up is the direction of the normal force, not friction.
- Down: Down is the weight’s direction. Friction runs along the surface.
Show solution 4
mg cos 30°. The weight component perpendicular to the plane is mg cos 30°. With zero perpendicular acceleration, N balances that component.
Why the other choices are wrong:
- mg: In this setup, N balances only the perpendicular component of weight. That component is smaller than mg on the incline.
- mg sin 30°: mg sin 30° is the weight component along the slope, the part that pulls the block downhill.
- mg / cos 30°: Dividing makes N bigger than the full weight. The perpendicular component is mg cos θ.
Show solution 5
The vector ma. ma is the mass times acceleration on the right side of Newton’s second law. It is not an additional interaction force.
Why the other choices are wrong:
- Tension from a rope: Tension is real: the rope pulls on the object.
- Weight from Earth: Weight is real: Earth pulls on the object.
- Normal force from a surface: The normal force is real: the surface pushes on the object.
Show solution 6
4 m/s². With right positive, ΣFₓ = 30 − 10 = 20 N. Then aₓ = 20/5 = 4 m/s².
Why the other choices are wrong:
- 6 m/s²: 30/5 ignores friction.
- 8 m/s²: That adds friction. Friction points left, against the push.
- 2 m/s²: That uses friction alone and ignores the push.
Show solution 7
19.6 N. Tension up and weight down balance: T = mg = 2 × 9.8 = 19.6 N.
Why the other choices are wrong:
- 2 N: 2 is the mass in kilograms, not a force.
- 0 N: At rest means the net force is zero, not the tension. Tension balances the weight.
- 9.8 N: 9.8 is g. Multiply by the mass to get the weight.
Show solution 8
686 N. With a = 0, N − mg = 0, so N = 70 × 9.8 = 686 N. The direction of motion doesn’t matter; acceleration does.
Why the other choices are wrong:
- Less than 686 N, because the elevator is moving down: Constant velocity means zero acceleration. N only differs from mg when the elevator speeds up or slows down.
- 0 N: N = 0 only in free fall, when a = −g.
- More than 686 N: N is larger than mg only with an upward acceleration. Here a = 0.
Answer key
Open all answers
- Weight down and normal up. Earth exerts weight on the book and the desk exerts a normal force on it. The book’s force on the desk acts on a different object.
- Only weight. After contact ends, the hand no longer exerts a launch force. In the stated model, gravity is the only force.
- Left. Kinetic friction opposes the block’s relative sliding across the floor, so it points left.
- mg cos 30°. The weight component perpendicular to the plane is mg cos 30°. With zero perpendicular acceleration, N balances that component.
- The vector ma. ma is the mass times acceleration on the right side of Newton’s second law. It is not an additional interaction force.
- 4 m/s². With right positive, ΣFₓ = 30 − 10 = 20 N. Then aₓ = 20/5 = 4 m/s².
- 19.6 N. Tension up and weight down balance: T = mg = 2 × 9.8 = 19.6 N.
- 686 N. With a = 0, N − mg = 0, so N = 70 × 9.8 = 686 N. The direction of motion doesn’t matter; acceleration does.
Studying for the final? Try the Physics 1 final exam review, a mixed practice test across the whole course.
Common questions
Does motion imply a force in the direction of travel?
No. Force determines acceleration. An object can move right while a net leftward force slows it down.
Should both members of a third-law pair appear?
Not on a diagram of one object. Each member acts on a different object.
Is friction always opposite velocity?
For kinetic friction, use the relative sliding at the contact. Static friction opposes the tendency to slip and can point in the direction an object moves.
Keep practicing
Try 3 days free3-day free trial, no card needed.
Next step after the diagram: work-energy theorem practice turns each arrow into work and a final speed.
Sources and fact checks
Definitions and methods checked against these textbook references. Practice scenarios and worked numbers were written for this guide.