PhysicsDrillFree guides

Work and energy · 11 checked problems

Work-energy theorem practice

The work-energy theorem says one thing: add up the work done by every force on an object, and you get its change in kinetic energy. That lets you jump from a starting speed to an ending speed using only forces and distances, with no time and no acceleration needed.

Wnet = ΔK = ½mv² − ½mv₀²

Each force does work W = Fd cos θ, where θ is the angle between the force and the displacement.

Everything here uses g = 9.8 m/s² and treats objects as single points that slide, so it fits algebra-based, calculus-based and AP Physics 1 courses.

The idea in plain English

Kinetic energy, K = ½mv², is the energy an object has because it moves. Work is how a force adds or removes that energy while the object moves through a distance.

  • A force along the motion does positive work and adds kinetic energy. A push from behind speeds you up.
  • A force against the motion does negative work and removes kinetic energy. Friction and brakes do this.
  • A force at 90° to the motion does zero work. It can change the direction, but never the speed.

The theorem adds those up. If the total (the net work) is +60 J, the object ends with 60 J more kinetic energy than it started with. If it is −60 J, it ends with 60 J less. If it is zero, its speed hasn’t changed, even if big forces were acting.

It comes straight from Newton’s second law. For a constant net force along the motion, Fnetd = mad, and the kinematics equation v² = v₀² + 2ad turns ad into ½(v² − v₀²). Multiply by m and you get Fnetd = ½mv² − ½mv₀². Calculus-based courses do the same thing with ∫F dx, which is why it still works when the force changes.

Quick check: is the work positive, negative or zero?

Getting the sign right is half of every work problem. For each force, picture the arrow and the direction the object moves, then pick one.

1. Friction on a box sliding across a floor
Why? (item 1)

Kinetic friction points backward, opposite the box’s displacement, so cos 180° = −1.

2. The floor’s normal force on that same sliding box
Why? (item 2)

The normal force points straight up and the box moves sideways. At 90°, cos 90° = 0, so no work.

3. Gravity on a ball while it rises after you throw it up
Why? (item 3)

Gravity points down while the ball moves up. That is why the ball slows down.

4. Gravity on the same ball on its way back down
Why? (item 4)

Now gravity and the displacement both point down, so gravity speeds the ball up.

5. String tension on a ball whirled in a horizontal circle at steady speed
Why? (item 5)

Tension points to the center and the ball moves along the circle, always at 90° to the string. Its speed never changes.

6. Your hands on a box you lower at a steady speed to the floor
Why? (item 6)

Your hands push up while the box moves down. Gravity does positive work and your hands do the same amount of negative work, so the speed stays steady.

The work ledger: a four-step method

Treat the problem like a bank statement. Every force gets one line, and the total is the change in kinetic energy.

  1. Draw the forces on the one object you care about. Mark which way it moves.
  2. Find each force’s work with W = Fd cos θ. Write the sign. Forces at 90° get 0.
  3. Add the column to get Wnet.
  4. Set Wnet = ½mv² − ½mv₀² and solve for whatever is missing: a speed, a distance or a force.

Here is the ledger for Example 1 below, filled in:

Work ledger: sled pulled 10 m by a rope at 30°
ForceSizeAngle to motionWork = Fd cos θ
Rope pull80 N30°+692.8 J
Kinetic friction23.4 N180°−234.0 J
Gravity196 N90°0 J
Normal force156 N90°0 J
Net work+458.8 J = ΔK

Worked examples

Each one shows a different way the theorem shows up on exams: an angled force with friction, a lift against gravity, a stopping distance and a changing force.

Example 1: A sled pulled at an angle, with friction

Forces on a sled pulled by a rope at 30 degreesA sled moves to the right a distance d. The rope pulls up and to the right at 30 degrees above horizontal. Friction points left, gravity points down and the normal force points up. F = 80 N30° friction mg N d = 10 m
Example 1. Only the part of each force along the 10 m displacement does work. Gravity and the normal force are at 90° to it.

You pull a 20 kg sled from rest with a rope at 30° above horizontal. The rope tension is 80 N and the coefficient of kinetic friction is 0.15. How fast is the sled moving after 10 m?

  1. Normal force first. The rope lifts a little, so N isn’t mg. Vertical forces balance: N + 80 sin 30° = mg, so N = 196 − 40 = 156 N.
  2. Friction: f = μkN = 0.15 × 156 = 23.4 N, pointing backward.
  3. Ledger: rope +80 × 10 × cos 30° = +692.8 J. Friction −23.4 × 10 = −234.0 J. Gravity and normal force 0.
  4. Net work = 692.8 − 234.0 = 458.8 J.
  5. 458.8 = ½(20)v² − 0, so v² = 45.9 and v = 6.77 m/s.

Most common slip: using N = mg = 196 N. That gives friction 29.4 N and a speed of 6.32 m/s, which an exam key will mark wrong.

Example 2: A crane lifting a crate, gravity doing negative work

A crane cable lifts a 50 kg crate from rest, pulling up with a steady 600 N. How fast is the crate rising after 4.0 m?

  1. Two forces act: the cable (up) and gravity (down). The crate moves up.
  2. Cable: +600 × 4.0 = +2400 J.
  3. Gravity: mg = 490 N, pointing opposite the motion: −490 × 4.0 = −1960 J.
  4. Net work = 2400 − 1960 = 440 J = ½(50)v².
  5. v² = 17.6, so v = 4.20 m/s.

Here gravity is a force in the ledger, so there’s no mgh potential energy term anywhere. Counting both would count gravity twice. More on that below.

Example 3: Stopping distance grows with speed squared

A 1200 kg car is going 25 m/s when the driver locks the brakes. The tires skid with μk = 0.70. How far does it skid? How far would it skid from half that speed?

  1. Only friction does work along the motion: f = μkmg, and its work is −μkmg·d.
  2. Theorem: −μkmg·d = 0 − ½mv². The mass cancels: d = v² / (2μkg).
  3. d = 25² / (2 × 0.70 × 9.8) = 625 / 13.72 = 45.6 m.
  4. At 12.5 m/s: d = 156.25 / 13.72 = 11.4 m, one quarter as far.

The mass dropped out, so a truck and a hatchback starting at the same speed on the same road with the same μ skid the same distance. Halving speed cuts the skid to a quarter, which is why speed matters so much in crashes.

Example 4: A force that changes, read from a graph

Force versus position graphThe force rises in a straight line from 0 newtons at 0 meters to 40 newtons at 2 meters, then stays at 40 newtons until 5 meters. The shaded area under the line is a triangle of 40 joules plus a rectangle of 120 joules. 40 J120 J 025position x (m) 40force F (N)
Example 4. The work is the area under the force–position graph: 40 J + 120 J = 160 J.

A 4.0 kg cart starts from rest on a frictionless track. The push on it grows from 0 to 40 N over the first 2.0 m, then stays at 40 N until x = 5.0 m (graph above). How fast is it going at 5.0 m?

  1. When the force changes, W = Fd doesn’t work directly. The work is the area under the force–position graph.
  2. Triangle from 0 to 2 m: ½ × 2.0 × 40 = 40 J. Rectangle from 2 to 5 m: 3.0 × 40 = 120 J.
  3. Net work = 160 J = ½(4.0)v².
  4. v² = 80, so v = 8.94 m/s.

Kinematics can’t do this in one step, because the acceleration isn’t constant during the first 2 m. The work-energy theorem doesn’t care.

Try 3 days free

3 days, unrestricted access. No card needed.

Work-energy theorem or conservation of energy?

Both give the same answers. They just file gravity and springs in different places. Pick one per problem.

Two ways to keep the books
CompareWork-energy theoremConservation of energy
EquationWnet = ΔKK₀ + U₀ + Wother = K + U
Gravity and springsForces in the ledger (Wg = −mgΔy, Wspring = ½k(xstart² − xend²))Potential energy: mgh and ½kx²
Friction, pushes, tensionForces in the ledgerWother
Best whenFew forces, level ground, or you want a force or distanceHeights change a lot, or springs and gravity both act
Classic trapWriting Wg in the work and mgh in the energy, which counts gravity twice

For more practice with friction work on slopes, see the inclined plane problems with friction guide.

Need the constant-acceleration equations instead? See the kinematics equations practice problems.

Got a collision? Use momentum for the hit and energy afterward, as in the conservation of momentum practice problems.

Practice problems

11 problems, from one-liners to multi-force ledgers. Type a number without units or pick an option, then check it. A wrong answer tells you what probably went wrong. Answers within 2% count, so rounding to 3 significant figures is fine.

Problem 1 of 11

1. A 1500 kg car speeds up from 10 m/s to 20 m/s on a level road. How much net work was done on it? Give your answer in kJ.

Show solution 1
  1. Wnet = ½m(v² − v₀²) = ½(1500)(20² − 10²).
  2. = 750 × (400 − 100) = 750 × 300 = 225,000 J = 225 kJ.
  3. Notice that doubling the speed took 3 times the starting kinetic energy, not 2 times.

Problem 2 of 11

2. You carry a grocery bag across a level parking lot at a steady walking speed. How much work does your upward holding force do on the bag?
Show solution 2
  1. Your force on the bag points up. The bag moves horizontally.
  2. W = Fd cos 90° = 0. That matches the work-energy theorem: the bag’s speed is steady, so its kinetic energy doesn’t change.

Problem 3 of 11

3. A 3.0 kg box starts from rest. You push it 4.0 m across the floor with a 25 N horizontal force while kinetic friction is 10 N. How fast is it moving at the end?

Show solution 3
  1. Work by push: +25 × 4.0 = +100 J. Work by friction: −10 × 4.0 = −40 J. Gravity and normal force: 0 (both vertical).
  2. Wnet = 60 J = ½(3.0)v².
  3. v² = 40, so v = 6.32 m/s.

Problem 4 of 11

4. A car skids to a stop in 20 m from 15 m/s with its wheels locked. Same car, same road, but now it is going 30 m/s. How far does it skid?

Show solution 4
  1. Friction is the same force in both cases, so f·d = ½mv² gives d ∝ v².
  2. Doubling the speed multiplies d by 2² = 4.
  3. d = 4 × 20 = 80 m.

Problem 5 of 11

5. A 1 kg cart and a 4 kg cart start at rest. The same 10 N net force pushes each one 2 m. Which gains more kinetic energy?
Show solution 5
  1. Wnet = 10 N × 2 m = 20 J for each cart.
  2. So ΔK = 20 J for each cart. The lighter cart is faster (v = √(2K/m)), but the kinetic energy is the same.
  3. Compare this with momentum: the same force for the same time gives the same momentum. Same force over the same distance gives the same kinetic energy.

Problem 6 of 11

6. You drag a box 6.0 m across the floor by a rope that pulls with 50 N at 60° above horizontal. How much work does the rope do?

Show solution 6
  1. The box moves horizontally and the rope is 60° above horizontal, so θ = 60°.
  2. W = (50)(6.0) cos 60° = 300 × 0.5 = 150 J.

Problem 7 of 11

7. A 0.145 kg baseball moving at 40 m/s is caught. The glove moves back 0.20 m while stopping it. What is the average force magnitude of the glove on the ball?

Show solution 7
  1. Starting K = ½(0.145)(40)² = ½(0.145)(1600) = 116 J. Final K = 0.
  2. The glove does −116 J of work: −F × 0.20 m = −116 J.
  3. F = 116 / 0.20 = 580 N.

Problem 8 of 11

8. A 5.0 kg cart is moving at 2.0 m/s. A push along its motion grows steadily from 0 N to 30 N over the next 4.0 m. Ignore friction. How fast is the cart moving at the end?

Show solution 8
  1. The force–distance graph is a triangle: W = ½ × 4.0 m × 30 N = 60 J.
  2. Starting K = ½(5.0)(2.0)² = 10 J, so ending K = 10 + 60 = 70 J.
  3. ½(5.0)v² = 70, v² = 28, v = 5.29 m/s.

Problem 9 of 11

9. A crate slides down a rough ramp at constant speed. What is the net work done on the crate?
Show solution 9
  1. Constant speed means the kinetic energy doesn’t change: ΔK = 0.
  2. By the work-energy theorem, Wnet = ΔK = 0. Gravity’s positive work and friction’s negative work cancel exactly.

Problem 10 of 11

10. A spring with k = 400 N/m is compressed 0.15 m and launches a 0.20 kg puck across frictionless ice. How fast does the puck leave the spring?

Show solution 10
  1. Spring work: W = ½kx² = ½(400)(0.15)² = ½(400)(0.0225) = 4.5 J.
  2. 4.5 = ½(0.20)v², so v² = 45.
  3. v = 6.71 m/s.

Problem 11 of 11

11. You lift a 2.0 kg book 1.5 m straight up at constant speed. How much work does your hand do on the book?

Show solution 11
  1. Constant speed, so ΔK = 0 and Whand + Wgravity = 0.
  2. Wgravity = −mgh = −(2.0)(9.8)(1.5) = −29.4 J.
  3. So Whand = +29.4 J.
Answer key (all 11)
  1. 225 kJ
  2. Zero, because your force is perpendicular to the motion
  3. 6.32 m/s
  4. 80 m
  5. They gain the same kinetic energy
  6. 150 J
  7. 580 N
  8. 5.29 m/s
  9. Zero
  10. 6.71 m/s
  11. 29.4 J

Mistakes that cost points

  • Using one force’s work as the net work. Wnet means every force, including friction and gravity.
  • ½m(Δv)² instead of ½m(v² − v₀²). Square each speed first, then subtract.
  • Forgetting cos θ, or using sin when the angle is measured from the motion.
  • Assuming N = mg when a rope pulls at an angle or the surface is tilted.
  • Counting gravity twice, as both Wg and a change in mgh.
  • Calling held objects “work.” Holding a bag still, or carrying it level, does zero work on it.
  • Dropping the starting kinetic energy when the object is already moving.

FAQ

What does the work-energy theorem say?

The net work done on an object by all the forces acting on it equals the change in its kinetic energy: Wnet = ½mv² − ½mv₀². Positive net work speeds the object up, negative net work slows it down, and zero net work leaves its speed unchanged.

When should I use the work-energy theorem instead of kinematics?

Use it when a problem links speeds to distances and never mentions time, especially when the force changes along the way, as with springs, force graphs or curved paths. The usual kinematics equations need constant acceleration, while the work-energy theorem does not.

Is the work-energy theorem the same as conservation of energy?

They are two bookkeeping styles for the same physics. The work-energy theorem counts gravity and springs as forces doing work. Conservation of energy counts them as potential energy instead. Pick one style per problem; using both counts gravity twice.

Can work be negative?

Yes. A force does negative work when it has a part pointing against the motion, like friction on a sliding box or gravity on a ball going up. Negative work takes kinetic energy away.

Does the normal force ever do work?

On a fixed surface the normal force is perpendicular to the motion, so it does zero work. It can do work when the surface itself moves, such as the floor of an elevator that is speeding up.

Keep practicing

Try 3 days free

3 days, unrestricted access. No card needed.

Sources and fact checks

The theorem, the definition of work and the sign rules were checked against OpenStax University Physics Volume 1 (chapter 7) and OpenStax College Physics 2e. The scenarios and numbers were written for this guide, and every answer was recomputed separately.