PhysicsDrillFree guides

Cumulative review · 18-question practice test

Physics 1 final exam review

About 18 min read · Report a mistake

A Physics 1 final mixes every unit together. The physics on it is mostly the same physics you already did, so what makes it hard is figuring out which idea a problem needs when it isn’t sitting under a chapter title. This review is built around that: a checklist of what to know, the five tools that solve almost every mechanics problem, worked examples that chain two tools together, and a shuffled practice test that tells you which tool each answer needed.

Everything uses g = 9.8 m/s², no air resistance, and algebra only, so it works for algebra-based, calculus-based and AP Physics 1.

Whole-course checklist

Tick what you could do on a blank page right now, without notes. Whatever stays unticked is your study list. Your ticks are saved in this browser only.

Motion
Guide: Pick the right constant-acceleration equation from what is given and what is asked
Guide: Split a projectile into horizontal and vertical motion that share one time
Forces
Guide: Draw a free-body diagram for one object before writing ΣF = ma
Guide: Handle static vs kinetic friction and tilted axes on a ramp
Energy and momentum
Rotation
Also common (check your syllabus)

The five tools, in plain English

Almost every Physics 1 problem is solved by one of these, or by two in a row. The skill a final tests is spotting which one.

1. Kinematics

Describes motion when acceleration is constant. Reach for it when time is given or asked and acceleration is constant. Write down v₀, v, a, t and Δx, cross out the one you don’t have and don’t need, and pick the equation without it.

2. Newton’s second law

Connects forces to acceleration. Reach for it when a problem names forces, tension, friction or normal force. Draw the free-body diagram first, pick axes along the acceleration, then write ΣF = ma for each direction. Circular motion is the same law with a = v²/r pointing to the center.

Practice it: circular motion practice problems.

3. Energy

Links speeds to heights, distances or springs without needing time or the shape of the path. Start energy + work by outside forces = end energy. For sliding on a fixed surface with constant normal force, kinetic friction removes μkN × distance from mechanical energy.

4. Momentum

The tool for collisions, explosions and things that stick together. Total momentum is the same just before and just after, as long as no big outside force acts during the event. Kinetic energy is conserved in an elastic collision, but not in a collision where objects stick.

Practice it: conservation of momentum practice problems.

5. Rotation and torque

The rotating version of all of the above. Reach for it when something spins, rolls or could tip. Στ = Iα plays the part of ΣF = ma, L = Iω is conserved with no outside torque, and a rolling object carries ½Iω² on top of ½mv².

Practice it: torque and rotational motion practice problems.

Read the question, then pick the tool
If the problem…Reach forWatch out
gives or asks for timeKinematicsOnly valid while acceleration is constant
asks for a force, tension or accelerationNewton’s 2nd lawOne free-body diagram per object
links a speed to a height, distance or spring, with no timeEnergyOn a fixed track, sliding friction removes energy and the normal force does no work
has a collision, explosion or objects stickingMomentumCheck whether kinetic energy is conserved; momentum still is
has something spinning, rolling or balancedTorque and rotationChoose the pivot that cancels the most unknowns
has two stages, like a collision then a swingTwo tools, one per stageSwitch tools at the moment the physics changes

One-page formula sheet

These are the equations that show up on most Physics 1 finals. If your instructor gives you a sheet, compare it with this one now so nothing surprises you on exam day.

Physics 1 formulas by unit
UnitFormulas
Kinematicsv = v₀ + at · Δx = v₀t + ½at² · v² = v₀² + 2aΔx · Δx = ½(v₀ + v)t
ForcesΣF = ma · W = mg · fs ≤ μsN · fk = μkN · ac = v²/r
GravitationF = Gm₁m₂/r² · g = GM/r² · circular-orbit speed v = √(GM/r)
Work and energyW = Fd cos θ · KE = ½mv² · PE = mgh · PEspring = ½kx² · Wnet = ΔKE · Pavg = W/Δt · P = Fv (force parallel to motion)
Momentump = mv · impulse J = FavgΔt = Δp · m₁v₁ + m₂v₂ = m₁v₁′ + m₂v₂′
Rotationv = rω · at = rα · ω = ω₀ + αt · Δθ = ω₀t + ½αt² · KErot = ½Iω²
Torqueτ = rF sin θ · Στ = Iα · L = Iω · equilibrium: ΣF = 0 and Στ = 0
Moments of inertiahoop MR² · solid disk ½MR² · solid sphere ⅖MR² · rod about center ¹⁄₁₂ML² · rod about end ⅓ML²
Oscillationsspring T = 2π√(m/k) · small-angle pendulum T = 2π√(L/g) · f = 1/T
Fluidsρ = m/V · P = P₀ + ρgh · Fbuoyant = ρfluidVsubg

Worked examples that chain two ideas

Final exam problems love to cross units. Each example below says which tool it uses and why, which is the step most students skip.

Example 1: Energy beats kinematics for a projectile’s landing speed

A ball is thrown at 15 m/s, 30° above horizontal, from the top of a 20 m cliff. How fast is it going when it hits the ground below?

Tool: energy. The question links a speed to a height drop and never asks for time.

  1. Start energy = end energy: ½mv₀² + mgh = ½mv².
  2. Mass cancels: v² = v₀² + 2gh = 15² + 2(9.8)(20) = 225 + 392 = 617.
  3. v = √617 = 24.8 m/s.

The 30° angle never mattered. Kinematics gets the same answer, but you would need both components and the flight time first. For the full component method, see projectile motion practice problems.

Example 2: Ballistic pendulum, momentum then energy

A 10 g bullet moving at 400 m/s hits a 2.0 kg wooden block hanging on a string and stays inside. How high does the block swing?

Tools: momentum for the collision, then energy for the swing.

  1. Stage 1, the collision. The bullet sticks, so kinetic energy is not conserved, but momentum is: (0.010)(400) = (2.010)v, so v = 1.99 m/s.
  2. Stage 2, the swing. Now only gravity does work: ½v² = gh, so h = v²/(2g) = (1.99)²/(2 × 9.8) = 0.202 m, about 20 cm.
  3. Check: the bullet started with 800 J of kinetic energy, and the block leaves the collision with only 4.0 J. Using energy across the collision would be wildly wrong.

Example 3: Loop-the-loop, Newton’s law then energy

Block released from height h into a loop of radius RA track drops from a starting point at height h, runs along the floor and enters a vertical circular loop of radius R. At the top of the loop the block's speed must be at least the square root of g times R. h R top: v ≥ √(gR)
Example 3. The block needs enough speed at the top that gravity alone can supply the centripetal force.

A small block slides without friction down a track and into a vertical loop of radius R = 0.80 m. From what minimum height h must it start to make it around the loop?

Tools: Newton’s second law at the top of the loop, then energy from the start to the top.

  1. At the top, the slowest the block can go is when the normal force drops to zero and gravity alone pulls it toward the center: mg = mv²/R, so vtop² = gR.
  2. Energy from the start (height h, at rest) to the top (height 2R): mgh = mg(2R) + ½m vtop² = mg(2R) + ½mgR.
  3. So h = 2.5R = 2.5 × 0.80 = 2.0 m.

Note that h = 2R is not enough: the block needs extra height to still be moving at the top.

Example 4: Rolling down a ramp, energy with rotation

A solid ball rolls without slipping from rest down a ramp, dropping 1.5 m in height. How fast is it moving at the bottom?

Tool: energy, with rotational kinetic energy added in.

  1. Rolling means two kinds of kinetic energy: mgh = ½mv² + ½Iω².
  2. For a solid sphere, I = ⅖mr², and rolling without slipping means ω = v/r. So ½Iω² = ⅕mv².
  3. mgh = ½mv² + ⅕mv² = (7/10)mv², so v = √(10gh/7) = √(10 × 9.8 × 1.5 / 7) = √21 = 4.6 m/s.

A frictionless block would reach √(2gh) = 5.4 m/s. The ball is slower because some of its energy goes into spinning. Mass and radius both cancel.

Example 5: A beam held by a cable, static equilibrium

A uniform 6.0 m beam of mass 30 kg sticks straight out from a wall on a hinge. A cable from the far end runs up to the wall at 30° above the beam. What is the tension?

Tool: torque. Nothing moves, so Στ = 0, and putting the pivot at the hinge removes the unknown hinge force.

  1. The beam’s weight acts at its center, 3.0 m from the hinge: τ = (30)(9.8)(3.0) = 882 N·m, clockwise.
  2. Only the part of the tension perpendicular to the beam makes torque: τ = T sin 30° × 6.0 = 3.0T, counterclockwise.
  3. 3.0T = 882, so T = 294 N.

If the final also asks for the hinge force, use ΣF = 0 next: the hinge pushes out 294 cos 30° = 255 N horizontally, and holds up 294 N of weight minus the cable’s 147 N vertical part, or 147 N.

Try 3 days free

3 days, unrestricted access. No card needed.

Mixed Physics 1 practice test

18 questions in shuffled order, like a real final. Type a number without units, or pick an option, then check it. A wrong answer tells you what probably went wrong, and every solution names the tool it used. Try to name the tool yourself before you start each one.

Question 1 of 18

1. A car starts from rest and speeds up at 3.0 m/s² for 6.0 s. How far does it go?

Show solution 1

Tool: Kinematics

  1. Given a, t and v₀ = 0, asked for x: use x = v₀t + ½at².
  2. x = ½(3.0)(6.0)² = ½(3.0)(36) = 54 m.

Question 2 of 18

2. A skier starts from rest at the top of a frictionless hill 35 m high. The slope curves and its shape isn’t given. What is the fastest way to find her speed at the bottom?
Show solution 2

Tool: Energy

  1. No time is asked, the path is unknown, and there is no friction: that points to energy.
  2. mgh = ½mv², so v = √(2gh). The shape of the hill drops out.

Question 3 of 18

3. Same skier: what is her speed at the bottom of the 35 m frictionless hill?

Show solution 3

Tool: Energy

  1. mgh = ½mv², so mass cancels.
  2. v = √(2 × 9.8 × 35) = √686 = 26.2 m/s.

Question 4 of 18

4. A 3.0 kg block and a 5.0 kg block sit side by side on a frictionless floor. A 24 N horizontal push on the 3.0 kg block shoves both. What force does the 3.0 kg block exert on the 5.0 kg block?

Show solution 4

Tool: Newton’s 2nd law

  1. Both blocks together: a = 24 N / 8.0 kg = 3.0 m/s².
  2. The only horizontal force on the 5.0 kg block is the contact force: F = (5.0)(3.0) = 15 N.

Question 5 of 18

5. A loaded truck hits a small parked car. During the crash, how does the force of the truck on the car compare with the force of the car on the truck?
Show solution 5

Tool: Newton’s 3rd law

  1. The two forces are a third-law pair, so they are equal and opposite.
  2. The car’s acceleration is bigger only because its mass is smaller.

Question 6 of 18

6. A 1200 kg car rounds a flat curve of radius 50 m at 15 m/s. How much friction force does the road have to provide?

Show solution 6

Tool: Circular motion

  1. Friction points toward the center and is the whole centripetal force.
  2. f = mv²/r = (1200)(15²)/50 = (1200)(225)/50 = 5400 N.

Question 7 of 18

7. A 2.0 kg box slides across a floor at 6.0 m/s. The kinetic friction coefficient is 0.30. How far does it slide before stopping?

Show solution 7

Tool: Work and energy

  1. Work done by friction = loss of kinetic energy: μmg·d = ½mv².
  2. Mass cancels: d = v²/(2μg) = 36/(2 × 0.30 × 9.8) = 6.12 m.

Question 8 of 18

8. An elevator motor lifts an 800 kg car at a steady 2.0 m/s. What power does it deliver? Give your answer in kilowatts.

Show solution 8

Tool: Power

  1. Constant speed, so the motor force equals the weight: F = mg = 7840 N.
  2. P = Fv = (7840)(2.0) = 15,680 W ≈ 15.7 kW.

Question 9 of 18

9. Two skaters stand still on ice, then push off each other and glide apart. Which statement is true?
Show solution 9

Tool: Momentum

  1. No outside horizontal force acts, so total momentum stays at zero: the momenta are equal and opposite.
  2. Chemical energy from their muscles becomes kinetic energy, so kinetic energy rises. That is an explosion-type event.

Question 10 of 18

10. A 1500 kg car moving at 20 m/s rear-ends a 1000 kg car at rest. The cars lock together. How fast do they move just after the crash?

Show solution 10

Tool: Momentum

  1. Momentum before = (1500)(20) = 30,000 kg·m/s.
  2. v = 30,000 / 2500 = 12 m/s. Kinetic energy is not conserved here.

Question 11 of 18

11. A 0.50 kg block is pushed against a spring (k = 200 N/m), compressing it 0.10 m, then released on a frictionless floor. How fast does it leave the spring?

Show solution 11

Tool: Energy (spring)

  1. Spring energy = ½(200)(0.10)² = 1.0 J.
  2. ½(0.50)v² = 1.0, so v² = 4.0 and v = 2.0 m/s.

Question 12 of 18

12. A wheel starts from rest with an angular acceleration of 4.0 rad/s². How many revolutions does it turn in 5.0 s?

Show solution 12

Tool: Rotational kinematics

  1. θ = ½αt² = ½(4.0)(5.0)² = 50 rad.
  2. 50 rad ÷ 2π = 7.96 revolutions, just under 8.

Question 13 of 18

13. A string wrapped around a uniform solid disk (M = 2.0 kg, R = 0.10 m) is pulled with a steady 6.0 N. The disk turns on a fixed frictionless axle. What is its angular acceleration?

Show solution 13

Tool: Torque

  1. τ = FR = (6.0)(0.10) = 0.60 N·m.
  2. I = ½MR² = ½(2.0)(0.10)² = 0.010 kg·m².
  3. α = τ/I = 0.60/0.010 = 60 rad/s².

Question 14 of 18

14. A spinning skater pulls her arms in. What happens?
Show solution 14

Tool: Angular momentum

  1. No outside torque, so L = Iω is conserved. Smaller I means larger ω.
  2. Rotational KE = L²/(2I) rises; her muscles do the work.

Question 15 of 18

15. A satellite orbits one Earth radius above the surface (so twice Earth’s radius from the center). What is g at that height? Use 9.8 m/s² at the surface.

Show solution 15

Tool: Gravitation

  1. g = GM/r², and r doubled from R to 2R.
  2. g = 9.8/2² = 9.8/4 = 2.45 m/s².

Question 16 of 18

16. A 30 kg child sits 2.0 m from the pivot of a seesaw. How far from the pivot, on the other side, must a 40 kg child sit to balance it?

Show solution 16

Tool: Static equilibrium

  1. Στ = 0 about the pivot: (30)(g)(2.0) = (40)(g)(d).
  2. d = 60/40 = 1.5 m.

Question 17 of 18

17. A 0.40 kg mass hangs on a spring with k = 160 N/m and bounces. What is the period?

Show solution 17

Tool: Oscillations

  1. √(m/k) = √(0.40/160) = √0.0025 = 0.050 s.
  2. T = 2π(0.050) = 0.314 s.

Question 18 of 18

18. A block of wood with density 600 kg/m³ floats in fresh water (1000 kg/m³). What percent of its volume is underwater?

Show solution 18

Tool: Fluids

  1. Floating means the buoyant force equals the weight: ρ_water V_sub g = ρ_wood V g.
  2. V_sub/V = 600/1000 = 0.60, so 60% is underwater.

Answer key

Open all 18 answers
  1. 54 m (Kinematics)
  2. Conservation of energy, because only the height change matters (Energy)
  3. 26.2 m/s (Energy)
  4. 15 N (Newton’s 2nd law)
  5. They are equal in size and opposite in direction (Newton’s 3rd law)
  6. 5400 N (Circular motion)
  7. 6.12 m (Work and energy)
  8. 15.7 kW (Power)
  9. Total momentum stays zero, and total kinetic energy increases (Momentum)
  10. 12 m/s (Momentum)
  11. 2.0 m/s (Energy (spring))
  12. 7.96 rev (Rotational kinematics)
  13. 60 rad/s² (Torque)
  14. Her spin rate goes up, her angular momentum stays the same, and her rotational kinetic energy goes up (Angular momentum)
  15. 2.45 m/s² (Gravitation)
  16. 1.5 m (Static equilibrium)
  17. 0.314 s (Oscillations)
  18. 60% (Fluids)

Missed several with the same tool? Go back to that row of the checklist, redo its homework problems, and then try the test again.

Six mistakes that cost the most points

  1. Using kinematics when acceleration changes. On curved tracks, springs or loops, use energy instead.
  2. Writing N = mg everywhere. On a ramp, in an elevator or with an angled push, find N from the free-body diagram.
  3. Conserving kinetic energy in a sticky collision. Conserve momentum through the impact; kinetic energy drops. Split the problem into stages, like Example 2.
  4. Forgetting rotational energy. A rolling ball or a pulley with mass stores ½Iω² too.
  5. Mixing degrees, radians and revolutions. Angular formulas need radians; convert at the end.
  6. Dropping signs. Pick a positive direction at the start of every problem and write it down.

A one-week plan

  1. Days 1–2: Take the practice test above cold. Tick the checklist honestly. List your two weakest tools.
  2. Days 3–5: Redo homework and old exam problems from those weak tools, covering the solutions. Read the solution only after a real attempt.
  3. Day 6: Do a timed mixed set from old exams. For each problem, write the tool’s name before any math.
  4. Day 7: Light review: your formula sheet, the six mistakes above, and sleep.

Want more on one topic? These guides go deeper: free body diagram practice, projectile motion practice problems and inclined plane problems with friction.

For the five constant-acceleration equations, use the kinematics equations practice problems.

Common questions

What is on a Physics 1 final exam?

Most college Physics 1 finals are cumulative mechanics: kinematics, Newton’s laws, friction and circular motion, work and energy, momentum, rotation, torque and static equilibrium. Many courses also add gravitation, oscillations, fluids, waves or heat at the end. Your syllabus and old exams are the best guide to which of those extra units count.

How should I study for a Physics 1 final in one week?

Spend the first two days finding weak units with a mixed practice test, not rereading notes. Spend the middle days redoing homework and old exam problems from those units without looking at the solutions. Use the last two days for timed mixed sets, because the hard part of a final is choosing the right method when the topics are shuffled.

What equations should I memorize for a Physics 1 final?

Check whether you get an equation sheet first. Either way, know the four constant-acceleration equations, ΣF = ma, f = μN, a = v²/r, W = Fd cos θ, KE = ½mv², PE = mgh and ½kx², p = mv, τ = rF sin θ, Στ = Iα, L = Iω and v = rω. Knowing when each one applies matters more than memorizing extra formulas.

How do I know which formula to use on a physics problem?

Sort by what the problem asks for. If time is given or asked, use kinematics. If forces or acceleration are asked, draw a free-body diagram and use ΣF = ma. If speeds and heights are linked with no time, use energy. If things collide, stick or push apart, use momentum. If something spins or could tip, use torque and rotation.

Is AP Physics 1 the same as college Physics 1?

They overlap a lot. AP Physics 1 is an algebra-based course that covers kinematics, forces, energy, momentum, rotation, oscillations and, since 2024–25, fluids. College Physics 1 can be algebra-based or calculus-based and often adds gravitation, waves or heat. The practice test on this page uses algebra, so it works for both.

Is this review for algebra-based or calculus-based physics?

Both. Every problem here can be solved with algebra and trigonometry. Calculus-based courses ask the same physics, plus a few problems where you integrate a changing force or take a derivative of position.

Keep practicing

Try 3 days free

3 days, unrestricted access. No card needed.

Missed the energy questions? Work through work-energy theorem practice for 11 more problems on work and kinetic energy.

Sources and fact checks

Formulas, moments of inertia and the loop, rolling and ballistic pendulum results were checked against OpenStax University Physics Volume 1. The AP Physics 1 unit list was checked against the College Board. Practice scenarios and numbers were written for this guide and recomputed separately.