PhysicsDrillFree guides

College practice · Worked answers

Projectile motion practice problems

College projectile-motion problems become manageable when you separate horizontal and vertical motion and keep the same time variable in both. The examples here assume constant g = 9.8 m/s², negligible air resistance, and upward-positive vertical coordinates.

Resolve the launch velocity first

For launch speed v₀ and angle θ above horizontal, v₀ₓ = v₀ cos θ and v₀ᵧ = v₀ sin θ. Under the stated model, aₓ = 0 and aᵧ = −g. Horizontal velocity stays constant; vertical velocity changes with time.

Two axes, one clock
QuantityHorizontalVertical
Displacementx − x₀ = v₀ₓty − y₀ = v₀ᵧt − ½gt²
Velocityvₓ = v₀ₓvᵧ = v₀ᵧ − gt
Acceleration0−g

Find time from the equation with enough known information, then use it in the other axis. At the highest point, vᵧ = 0, but aᵧ is still −g and vₓ is generally nonzero.

Use equal-height shortcuts only at equal heights

If launch and landing heights are the same, v₀ᵧ > 0, and the flight model remains valid, total time is T = 2v₀ᵧ/g and range is R = v₀² sin(2θ)/g. The maximum height above launch is v₀ᵧ²/(2g).

For a cliff or raised platform, solve the vertical displacement equation instead. The equal-height time and range shortcuts no longer apply. Keep the positive time that matches the physical event; the quadratic may also contain an earlier or unphysical root.

Check direction and units

Velocity components can be signed. Speed is √(vₓ² + vᵧ²), which is nonnegative. Use radians or degrees consistently with your calculator. A component cannot exceed the original speed in magnitude, and a distance answer should have length units rather than m/s.

Work through two examples

A launch and landing at the same height

  1. A projectile launches at 20 m/s, 30° above horizontal, and lands at its launch height. Components are v₀ₓ = 20 cos 30° ≈ 17.3205 m/s and v₀ᵧ = 10 m/s.
  2. Time is T = 2(10)/9.8 ≈ 2.0408 s. Range is v₀ₓT ≈ 35.35 m.
  3. The peak is 10²/(2 × 9.8) ≈ 5.102 m above launch. Keep unrounded components until the final calculation.

A horizontal launch from a ledge

  1. A projectile leaves a 19.6 m ledge horizontally at 8 m/s. Its initial vertical velocity is zero.
  2. Take launch height as y₀ = 0 and landing as y = −19.6. Then −19.6 = −4.9t², giving the positive time t = 2 s.
  3. The horizontal distance is 8 × 2 = 16 m. Vertical impact velocity is −9.8 × 2 = −19.6 m/s; horizontal velocity remains +8 m/s.

Try it yourself

Choose an answer, then check your reasoning. You can retry any question or open its solution.

1. At the peak of ideal projectile motion with nonzero horizontal velocity, which statement is true?
Show solution 1

Vertical velocity is zero, vertical acceleration is −g. The vertical velocity changes sign at the peak, passing through zero. Gravity continues to accelerate the projectile downward.

Why the other choices are wrong:

  • All velocity and acceleration vanish: Horizontal velocity keeps going, and gravity never turns off.
  • Horizontal velocity is zero: There is no horizontal acceleration, so vₓ stays the same the whole flight.
  • Vertical velocity and vertical acceleration are both zero: Gravity still acts at the top. That is why the projectile comes back down.
2. A projectile launches horizontally from 4.9 m above the ground. What is its flight time?
Show solution 2

1 s. With v₀ᵧ = 0, the drop satisfies 4.9 = 4.9t². The positive solution is t = 1 s.

Why the other choices are wrong:

  • 0.5 s: That is 4.9/9.8, height divided by g. Use h = ½gt², so t = √(2h/g).
  • About 0.71 s: √(4.9/9.8) leaves out the 2 in t = √(2h/g).
  • 2 s: 2 s is the time for a 19.6 m drop. For 4.9 m, 4.9 = 4.9t² gives t = 1 s.
3. Horizontal speed is 12 m/s and flight time is 3 s. What is horizontal displacement?
Show solution 3

36 m. With no horizontal acceleration, displacement is vₓt = 12 × 3 = 36 m.

Why the other choices are wrong:

  • 4 m: That divides. Distance is speed times time.
  • 15 m: That adds the speed and the time.
  • 44.1 m: 44.1 m is ½gt² for 3 s; it would be the drop with zero initial vertical velocity. The question asks for horizontal distance.
4. A projectile launches at 10 m/s and 30° above horizontal. What is v₀ᵧ?
Show solution 4

5 m/s. The vertical component is v₀ sin θ = 10 × sin 30° = 5 m/s.

Why the other choices are wrong:

  • 8.66 m/s: 10 cos 30° is the horizontal component. Use sine for vertical when the angle is measured from horizontal.
  • 10 m/s: 10 m/s is the full launch speed, not a component.
  • About 11.55 m/s: That divides by cos 30°. A component can’t be bigger than the launch speed.
5. When is R = v₀² sin(2θ)/g valid in this guide’s model?
Show solution 5

When launch and landing heights are equal. The shortcut uses the equal-height flight time. With unequal heights, solve the vertical equation for time first.

Why the other choices are wrong:

  • For any landing height: The formula is built on the equal-height flight time. Different heights change the time.
  • Only for horizontal launches: A horizontal launch has θ = 0, so the formula gives R = 0, which is wrong for a ledge.
  • Only at 45°: It works at any angle with equal heights. 45° just gives the largest range.
6. A projectile launches at 19.6 m/s, 30° above horizontal, and lands at its launch height. What is its flight time?
Show solution 6

2 s. v₀ᵧ = 19.6 × sin 30° = 9.8 m/s. With equal heights, T = 2v₀ᵧ/g = 2 × 9.8/9.8 = 2 s.

Why the other choices are wrong:

  • 1 s: 1 s is the time to reach the peak. The full flight is twice as long.
  • 4 s: That uses the full speed, 2 × 19.6/9.8. Use the vertical component, 19.6 sin 30° = 9.8 m/s.
  • About 3.46 s: That uses the horizontal component, 19.6 cos 30°. Flight time depends on the vertical component.
7. A projectile has v₀ᵧ = 14 m/s. How high does it rise above the launch point?
Show solution 7

10 m. Maximum height = v₀ᵧ²/(2g) = 14²/(2 × 9.8) = 196/19.6 = 10 m.

Why the other choices are wrong:

  • 20 m: That is 196/9.8, which leaves out the 2 in v₀ᵧ²/(2g).
  • About 1.43 m: 14/9.8 ≈ 1.43 is the time to the peak in seconds, not a height.
  • About 0.71 m: That forgets to square v₀ᵧ: 14/19.6.
8. A ball rolls off a 1.225 m high table at 3 m/s. How far from the table’s edge does it land?
Show solution 8

1.5 m. Fall time: 1.225 = 4.9t², so t² = 0.25 and t = 0.5 s. Horizontal distance = 3 × 0.5 = 1.5 m.

Why the other choices are wrong:

  • 0.75 m: That multiplies by t² = 0.25 instead of t = 0.5 s.
  • 3 m: That assumes 1 s of flight. Find the fall time from the height first.
  • 1.225 m: 1.225 m is the table height. The landing distance is vₓt.

Answer key

Open all answers
  1. Vertical velocity is zero, vertical acceleration is −g. The vertical velocity changes sign at the peak, passing through zero. Gravity continues to accelerate the projectile downward.
  2. 1 s. With v₀ᵧ = 0, the drop satisfies 4.9 = 4.9t². The positive solution is t = 1 s.
  3. 36 m. With no horizontal acceleration, displacement is vₓt = 12 × 3 = 36 m.
  4. 5 m/s. The vertical component is v₀ sin θ = 10 × sin 30° = 5 m/s.
  5. When launch and landing heights are equal. The shortcut uses the equal-height flight time. With unequal heights, solve the vertical equation for time first.
  6. 2 s. v₀ᵧ = 19.6 × sin 30° = 9.8 m/s. With equal heights, T = 2v₀ᵧ/g = 2 × 9.8/9.8 = 2 s.
  7. 10 m. Maximum height = v₀ᵧ²/(2g) = 14²/(2 × 9.8) = 196/19.6 = 10 m.
  8. 1.5 m. Fall time: 1.225 = 4.9t², so t² = 0.25 and t = 0.5 s. Horizontal distance = 3 × 0.5 = 1.5 m.

Studying for the final? Try the Physics 1 final exam review, a mixed practice test across the whole course.

Common questions

Is horizontal motion really independent of vertical motion?

Under the no-drag, constant-gravity model, the component equations are independent and share the same elapsed time.

Is 45° always the maximum-range angle?

For fixed launch speed and equal launch/landing height without drag, yes. Different landing heights or air resistance change the result.

Should I use g = 9.8 or 9.81?

Use the value given by your instructor or problem. This guide consistently uses 9.8 m/s².

Shaky on the 1D equations? Start with the kinematics equations practice problems.

Next topic: inclined plane problems with friction.

Keep practicing

Try 3 days free

3-day free trial, no card needed.

Sources and fact checks

Definitions and methods checked against these textbook references. Practice scenarios and worked numbers were written for this guide.