PhysicsDrillFree guides

1D motion and free fall · 12 checked problems

Kinematics equations practice problems

Every constant-acceleration problem uses the same five quantities: Δx, v₀, v, a and t. You’re given three, you want a fourth, and the fifth is missing. The missing one tells you which equation to use. That single habit solves most of the kinematics problems on a Physics 1 exam.

Everything here uses g = 9.8 m/s², ignores air resistance and picks a + direction at the start of each problem. It fits algebra-based, calculus-based and AP Physics 1 courses.

The Big 5 kinematics equations

Here they are, sorted by the one quantity each equation leaves out. They only hold while the acceleration stays constant. If it changes partway through, split the motion into stages.

The five kinematics equations and the quantity each one leaves out
#EquationLeaves outReach for it when
1v = v₀ + atΔx (displacement)No distance in the problem. Speeds and times only.
2Δx = v₀t + ½at²v (final velocity)You know the start, the acceleration and the time.
3v² = v₀² + 2aΔxt (time)No time anywhere. Braking distances, runways, drops to a speed.
4Δx = ½(v₀ + v)ta (acceleration)Start and end speeds plus a time, and nobody tells you a.
5Δx = vt − ½at²v₀ (starting velocity)You know how it ended but not how it started.
  • Δx is displacement: final position minus starting position. It can be negative.
  • v₀ and v are the starting and final velocity. Both carry a sign.
  • a is the constant acceleration. In free fall it is −9.8 m/s² if up is +.
  • t is the time between the start and the end you care about.

Some textbooks, including OpenStax, list only the first four and write position as x − x₀ instead of Δx. The fifth is just equations 1 and 2 combined to get rid of v₀. It saves a step when the starting speed is unknown.

Equation picker: which one do I use?

Read the problem and find the one quantity that is neither given nor asked for. Pick it below to see your equation. The words from rest and comes to a stop count as given: they mean v₀ = 0 or v = 0.

Which quantity does the problem never mention?

Pick a quantity to see the matching equation.

  1. Pick a + direction and stick with it. Up or forward is usual.
  2. Write the five symbols in a column and fill in what you know, with signs. Put a ? by the one you want.
  3. Cross out the blank one, then use the equation that leaves it out.
  4. Solve with letters first, then plug in numbers, then check the sign and size of the answer.

Where the equations come from

You don’t need to derive them on an exam, but one picture makes them easy to remember. With constant acceleration, a velocity–time graph is a straight line with slope a. That gives equation 1 directly: v = v₀ + at.

Velocity–time graph for constant accelerationA straight line rises from v₀ at time zero to v at time t. The area under it is split into a rectangle of height v₀ and width t, and a triangle on top with height at and width t. v₀vt0 v₀t (rectangle)½at² (triangle) atvelocitytime
The area under a velocity–time graph is the displacement. Rectangle plus triangle gives Δx = v₀t + ½at². The same area is also the average height, ½(v₀ + v), times t.

The area under the line is the displacement. Split it into a rectangle and a triangle and you get equation 2. Use the average velocity, ½(v₀ + v), instead and you get equation 4. Eliminate t between equations 1 and 2 and you get equation 3. Calculus-based courses get the same results by integrating a constant a twice.

Worked examples

Each one starts with the same five-symbol list, so you can see how the missing quantity picks the equation.

Example 1: braking distance (no time)

A car moving at 25 m/s brakes steadily at 5.0 m/s² until it stops. How far does it travel while braking?

Example 1: the five quantities
Δxv₀vat
?+25 m/s0−5.0 m/s²not mentioned
  1. Time is missing, so use v² = v₀² + 2aΔx.
  2. 0 = 25² + 2(−5.0)Δx, so 10Δx = 625.
  3. Δx = 62.5 m. The acceleration is negative because the car slows while moving in the + direction.

Example 2: speeding up for a set time (no final speed)

A cyclist rolling at 4.0 m/s speeds up at 1.5 m/s² for 6.0 s. How far does she go in that time?

  1. Knowns: v₀ = 4.0 m/s, a = 1.5 m/s², t = 6.0 s. Wanted: Δx. Missing: v.
  2. Δx = v₀t + ½at² = (4.0)(6.0) + ½(1.5)(6.0)² = 24 + 27 = 51 m.
  3. Bonus: her final speed is v = v₀ + at = 4.0 + 9.0 = 13 m/s. Average speed (4 + 13)/2 = 8.5 m/s times 6.0 s also gives 51 m, a quick check.

Example 3: a slowing train (no acceleration)

A train slows steadily from 30 m/s to 10 m/s in 20 s. How far does it travel?

  1. Knowns: v₀ = 30 m/s, v = 10 m/s, t = 20 s. Wanted: Δx. Missing: a.
  2. Δx = ½(v₀ + v)t = ½(30 + 10)(20) = 400 m.
  3. You never needed a, but if asked: a = (v − v₀)/t = −20/20 = −1.0 m/s².

Example 4: dropped from a balcony (free fall)

A phone falls from rest off a balcony 20 m above the ground. How long does it fall, and how fast is it going when it lands?

  1. Take up as +. Then v₀ = 0, a = −9.8 m/s², and the phone ends 20 m lower, so Δy = −20 m.
  2. Time: Δy = v₀t + ½at² gives −20 = 0 − 4.9t², so t² = 4.08 and t ≈ 2.02 s.
  3. Speed: v = v₀ + at = −9.8 × 2.02 ≈ −19.8 m/s. The minus sign just means downward; the speed is 19.8 m/s.
  4. Check with the time-free equation: v² = 0 + 2(−9.8)(−20) = 392, and √392 ≈ 19.8. Same answer.

Example 5: thrown straight up

You throw a ball straight up at 15 m/s. How high does it rise, and when does it come back to your hand?

  1. Take up as +: v₀ = +15 m/s, a = −9.8 m/s². At the top, v = 0.
  2. Height: 0 = 15² + 2(−9.8)Δy, so Δy = 225/19.6 ≈ 11.5 m.
  3. Time to the top: 0 = 15 − 9.8t, so t ≈ 1.53 s.
  4. Back at your hand, Δy = 0. The motion is symmetric, so the total is 2 × 1.53 ≈ 3.06 s, and it arrives moving 15 m/s downward.
Try 3 days free

3 days, unrestricted access. No card needed.

Free fall: the same equations with a = −g

Anything moving only under gravity is in free fall, whether it was dropped, thrown up or thrown down. Set a = −9.8 m/s² (up is +) and use the Big 5 on the vertical motion.

Free-fall facts worth memorizing
SituationWhat you know without being told
“Dropped” or “released from rest”v₀ = 0
At the highest pointv = 0 for an instant, but a is still −9.8 m/s²
Lands at the launch heightΔy = 0; time up = time down; it lands at the launch speed, pointing down
Thrown down vs thrown up at the same speedSame speed at the ground (only the time differs)
Any free-fall objectIts velocity changes by 9.8 m/s every second, always downward

Signs are where free-fall points get lost. If up is +, a ball below its launch point has a negative Δy, and a falling ball has a negative v. Answers like “the depth is 30.6 m” come from reporting the size of a negative Δy.

A short 2D recap: projectiles

A projectile is just two kinematics problems that share a clock.

  • Horizontal: a = 0, so the velocity never changes and x = vₓt.
  • Vertical: free fall, a = −9.8 m/s², with all of the Big 5 available.
  • Link: the time t is the same in both. Usually you find t from the vertical motion and use it horizontally.

Problem 11 below is a quick one. For launch angles, range and maximum height, work through the projectile motion practice problems.

Practice problems

12 problems: equation picking, 1D motion, free fall and one projectile. Type a number without units or pick an option, then check it. A wrong answer tells you what probably went wrong. Answers within 2% count, so 3 significant figures is fine.

Problem 1 of 12

1. A runner’s starting speed, final speed and acceleration are given, and you want the distance she covers. Which equation goes straight to the answer?
Show solution 1
  1. Known: v₀, v, a. Wanted: Δx. Never mentioned: t.
  2. The equation without t is v² = v₀² + 2aΔx, so solve it for Δx = (v² − v₀²)/(2a).

Problem 2 of 12

2. A plane starts from rest and speeds up at a steady 3.0 m/s² until it reaches its takeoff speed of 60 m/s. How long must the runway be, at minimum?

Show solution 2
  1. Known: v₀ = 0, v = 60 m/s, a = 3.0 m/s². Missing: t.
  2. v² = v₀² + 2aΔx gives 60² = 0 + 2(3.0)Δx.
  3. Δx = 3600 ÷ 6.0 = 600 m.

Problem 3 of 12

3. A car moving at 12 m/s speeds up at 2.5 m/s² for 4.0 s. How fast is it going at the end?

Show solution 3
  1. Known: v₀ = 12 m/s, a = 2.5 m/s², t = 4.0 s. Missing: Δx.
  2. v = v₀ + at = 12 + (2.5)(4.0) = 12 + 10 = 22 m/s.

Problem 4 of 12

4. A car reaches 20 m/s after speeding up at a steady 2.0 m/s² for 5.0 s. The starting speed isn’t given. How far did it travel during those 5.0 s?

Show solution 4
  1. Known: v = 20 m/s, a = 2.0 m/s², t = 5.0 s. Missing: v₀.
  2. Δx = vt − ½at² = (20)(5.0) − ½(2.0)(5.0)² = 100 − 25 = 75 m.
  3. Check: v₀ = v − at = 20 − 10 = 10 m/s, and v₀t + ½at² = 50 + 25 = 75 m. Same answer.

Problem 5 of 12

5. A truck slows steadily from 28 m/s to 12 m/s over 100 m. Taking its direction of travel as positive, what is its acceleration? Include the sign.

Show solution 5
  1. Known: v₀ = 28 m/s, v = 12 m/s, Δx = +100 m. Missing: t.
  2. a = (v² − v₀²)/(2Δx) = (144 − 784)/(200) = −640/200.
  3. a = −3.2 m/s². Negative, because the velocity is positive and getting smaller.

Problem 6 of 12

6. You drop a stone into a well and it hits the water 2.5 s later. Ignoring air resistance and the time for the sound to come back up, how deep is the water surface below your hand?

Show solution 6
  1. Take up as positive: v₀ = 0, a = −9.8 m/s², t = 2.5 s.
  2. Δy = 0 + ½(−9.8)(2.5)² = −4.9 × 6.25 = −30.6 m.
  3. The minus sign means 30.6 m below your hand, so the depth is about 30.6 m.

Problem 7 of 12

7. You throw a ball straight up at 19.6 m/s and catch it at the same height. How long is it in the air?

Show solution 7
  1. Take up as positive: v₀ = +19.6 m/s, a = −9.8 m/s², Δy = 0.
  2. 0 = 19.6t − 4.9t² = t(19.6 − 4.9t), so t = 0 (the throw) or t = 19.6/4.9.
  3. t = 4.0 s. That is 2.0 s up and 2.0 s down.

Problem 8 of 12

8. At the very top of its flight, a ball thrown straight up has:
Show solution 8
  1. At the top the vertical velocity passes through zero for an instant.
  2. Gravity never switches off, so a = 9.8 m/s² downward the whole flight, including the top.

Problem 9 of 12

9. From a 30 m roof, you throw a ball straight down at 8.0 m/s. How fast is it moving just before it hits the ground?

Show solution 9
  1. Take down as positive: v₀ = 8.0 m/s, a = +9.8 m/s², Δy = +30 m.
  2. v² = 8.0² + 2(9.8)(30) = 64 + 588 = 652.
  3. v = √652 ≈ 25.5 m/s. (Throwing it up at 8.0 m/s instead gives the same landing speed, because it comes back down past the roof at 8.0 m/s.)

Problem 10 of 12

10. A car starts from rest and speeds up at 2.0 m/s² for 10 s, then brakes at 4.0 m/s² until it stops. What total distance does it cover?

Show solution 10
  1. Stage 1: Δx₁ = ½at² = ½(2.0)(10)² = 100 m, and v = at = 20 m/s.
  2. Stage 2: 0 = 20² + 2(−4.0)Δx₂, so Δx₂ = 400/8.0 = 50 m.
  3. Total = 100 + 50 = 150 m.

Problem 11 of 12

11. A ball rolls off a 1.25 m high table at 3.0 m/s horizontally. How far from the foot of the table does it land?

Show solution 11
  1. Vertical: 1.25 = ½(9.8)t², so t² = 0.2551 and t ≈ 0.505 s.
  2. Horizontal: a = 0, so x = vₓt = (3.0)(0.505) ≈ 1.52 m.

Problem 12 of 12

12. From what height must you drop a ball for it to hit the ground at 14 m/s?

Show solution 12
  1. Take down as positive: v₀ = 0, v = 14 m/s, a = 9.8 m/s².
  2. 14² = 0 + 2(9.8)h, so h = 196/19.6 = 10 m.
Answer key (all 12)
  1. v² = v₀² + 2aΔx
  2. 600 m
  3. 22 m/s
  4. 75 m
  5. −3.2 m/s²
  6. 30.6 m
  7. 4 s
  8. v = 0 and a = 9.8 m/s² downward
  9. 25.5 m/s
  10. 150 m
  11. 1.52 m
  12. 10 m

Mistakes that cost points

  • Using the equations when a changes. If the acceleration changes, split the motion into stages. The final velocity of one stage is the starting velocity of the next.
  • Mixing signs. If up is +, then g enters as −9.8 m/s². Don’t make it positive halfway through.
  • Setting a = 0 at the top. Only the velocity is zero there.
  • (Δv)² instead of v² − v₀². Square each speed first, then subtract.
  • Dropping the ½ in ½at², or the 2 in 2aΔx.
  • Mixing up distance and displacement. Δx is final minus starting position, so a ball that goes up and comes back has Δy = 0.
  • Using a projectile’s full speed in the horizontal equation. Use only vₓ there.

FAQ

What are the 5 kinematics equations?

For constant acceleration: v = v₀ + at, Δx = v₀t + ½at², v² = v₀² + 2aΔx, Δx = ½(v₀ + v)t and Δx = vt − ½at². Each one links four of the five quantities Δx, v₀, v, a and t, and leaves one out.

How do I know which kinematics equation to use?

List the three quantities you know and the one you want. The fifth quantity is the one the problem never mentions. Use the equation that leaves that quantity out. For example, if time is never mentioned, use v² = v₀² + 2aΔx.

When do the kinematics equations not work?

They only work while the acceleration is constant. If the acceleration changes, split the motion into stages with constant acceleration in each, or use graphs, calculus or energy methods instead.

Is acceleration zero at the top of a ball’s flight?

No. At the top the velocity is zero for an instant, but gravity still pulls down, so the acceleration is still 9.8 m/s² downward. That is why the ball starts falling again.

Do the kinematics equations work for projectile motion?

Yes, one direction at a time. Use them vertically with a = −9.8 m/s², and horizontally with a = 0, so x = vₓt. The time is the same in both directions.

Where to go next

Keep practicing

Try 3 days free

3 days, unrestricted access. No card needed.

Sources and fact checks

The equations, the constant-acceleration condition and the free-fall facts were checked against OpenStax University Physics Volume 1 (chapters 3 and 4) and OpenStax College Physics 2e (chapter 2). The problems and numbers were written for this guide, and every answer was recomputed separately.