PhysicsDrillFree guides

Momentum and collisions · 15 checked problems

Conservation of momentum and collisions practice problems

Collision problems look scary, but almost all of them run on two ideas. Total momentum is conserved when outside forces have no net effect on the objects you track. Kinetic energy is conserved in elastic collisions. Get those straight, keep track of signs, and the algebra mostly takes care of itself.

When outside forces have no net effect

pbefore = pafter

Add up m·v for every object, with signs, before and after.

Only if it is elastic

KEbefore = KEafter

Otherwise some kinetic energy turns into heat, sound and dents.

1. Momentum is mass times velocity, and it has a direction

p = mv   (units: kg·m/s)

Momentum is how hard something is to stop. A slow truck and a fast baseball can both have a lot of it. Because velocity is a vector, so is momentum: it points the same way the object moves.

  • In one dimension, the direction is just a sign. Pick a + direction, and anything moving the other way gets a negative velocity and a negative momentum.
  • In two dimensions, keep an x-part and a y-part: pₓ = mvₓ and py = mvy.
  • The total momentum of a group of objects is the vector sum of each one’s momentum. Two equal carts moving toward each other at the same speed have a total momentum of zero.

2. Impulse: what changes momentum

J = FavgΔt = Δp = m(v − v₀)

A force acting for a time gives an object an impulse. The impulse–momentum theorem says that impulse equals the change in momentum. It is really Newton’s second law, F = Δp/Δt, rearranged. Units match: 1 N·s is the same as 1 kg·m/s.

Real collision forces aren’t constant. They spike up and fall back down in a few milliseconds. That’s fine: the impulse is the area under the force–time graph, whatever its shape.

Force–time graph for a racket hitting a tennis ballThe force rises in a straight line from 0 to a peak of 1200 newtons at 3 milliseconds, then falls back to 0 at 6 milliseconds, making a triangle. The shaded area of the triangle is the impulse, 3.6 newton-seconds. 1200036 Area = impulse½ × 1200 × 0.006= 3.6 N·s F (N)t (ms)
A racket’s force on a tennis ball. The triangle’s area, ½ × base × height, is the impulse.

Worked example A: reading impulse off the graph

A 0.060 kg tennis ball arrives at 30 m/s. The racket’s force follows the graph above. How fast does the ball leave?

  1. Pick a direction: + is the way the ball leaves the racket, so v₀ = −30 m/s.
  2. Impulse = triangle area = ½ × 1200 N × 0.0060 s = 3.6 N·s, in the + direction.
  3. J = m(v − v₀): 3.6 = 0.060(v − (−30)), so v + 30 = 60.
  4. v = +30 m/s. The ball leaves at 30 m/s in the opposite direction.

Check: the average force is J/Δt = 3.6/0.0060 = 600 N, half the peak. That’s expected for a triangle.

The same idea explains airbags and bent knees. For a fixed Δp, a longer stopping time means a smaller average force.

3. When is momentum conserved?

Momentum belongs to a system, the group of objects you choose to track. Forces between objects inside the system come in Newton’s third-law pairs. They push equally in opposite directions for the same time, so their impulses cancel. Only external forces, from things outside the system, can change the total.

If ΣFexternal = 0, then ptotal stays constant.

Is momentum conserved? Three checks
AskWhat it meansExample
Did I include both colliding objects?If only one object is in your system, the other one’s push is external and the momentum changes.One ball alone: not conserved. Both balls together: conserved if outside forces have no net effect.
Is any outside force unbalanced?Gravity balanced by a normal force is fine. Unbalanced friction, a push or a pull is not.Carts on a level, low-friction track: conserved horizontally.
Is the collision short?During a quick impact the internal forces are huge, so small outside forces barely change p in that instant.Two cars crashing on a road: use “just before” and “just after” when the road’s impulse during the short impact is small. Friction matters as they skid afterward.

Momentum can also be conserved in one direction only. A cart rolling under a falling sandbag keeps its horizontal momentum, since nothing pushes it sideways, while gravity and the track handle the vertical.

4. Elastic, inelastic or perfectly inelastic?

For a system with no net external force, every collision conserves momentum. What sorts them is what happens to kinetic energy, KE = ½mv².

The three collision types
TypeMomentumKinetic energyWhat it looks like
ElasticConservedConservedObjects bounce apart with no lasting dents. Pool balls, gliders with magnets, atoms.
InelasticConservedSome lostObjects separate, but some kinetic energy becomes heat, sound or deformation. Most real collisions.
Perfectly inelasticConservedMost lost (the maximum allowed)Objects stick and move off together with one shared velocity.

The kinetic-energy check: add up ½mv² before and after. Equal means elastic. Less after means inelastic. If KE comes out bigger after, either something supplied energy (an explosion or a spring) or you made a mistake.

Perfectly inelastic: m₁v₁ + m₂v₂ = (m₁ + m₂)vf

5. The 1D elastic-collision formulas

For a head-on elastic collision, momentum and KE together give two equations in two unknowns. Solving them once gives formulas you can reuse. Here v₁ and v₂ are the velocities before, with signs, and the primes are after:

v₁′ = [(m₁ − m₂)v₁ + 2m₂v₂] / (m₁ + m₂)
v₂′ = [(m₂ − m₁)v₂ + 2m₁v₁] / (m₁ + m₂)

A shortcut that comes from the same algebra: in a 1D elastic collision the objects separate at the same relative speed they approached with, so v₂′ − v₁′ = −(v₂ − v₁). It’s a quick way to check your answer.

Special cases with object 2 at rest (v₂ = 0)
MassesWhat happens
m₁ = m₂They swap: object 1 stops, object 2 leaves with v₁.
m₁ much smaller than m₂Object 1 bounces back at almost the same speed; object 2 barely moves. (Ball off a wall.)
m₁ much bigger than m₂Object 1 barely slows; object 2 shoots off at almost 2v₁.

6. 2D collisions: one equation per direction

Momentum is a vector, so in two dimensions it is conserved in x and in y separately. You get two equations:

Σpₓ before = Σpₓ after    and    Σpy before = Σpy after

  1. Draw axes and split every velocity into components (vₓ = v cos θ, vy = v sin θ).
  2. Write the x equation and the y equation.
  3. Solve, then rebuild the final speed with √(vₓ² + vy²). For direction, use tan θ = vy/vₓ and check the signs of both components to pick the right quadrant.
Adding momentum vectors in a 2D collisionAn arrow pointing east labeled 6 kilogram meters per second, from the 2 kilogram puck. From its tip, an arrow pointing north labeled 6 kilogram meters per second, from the 3 kilogram puck. A third arrow from the start to the end is the total momentum, about 8.5 kilogram meters per second at 45 degrees north of east. pₓ = 2.0 × 3.0 = 6.0py = 3.0 × 2.0= 6.0total ≈ 8.5 kg·m/sat 45°
Momenta add tip to tail, like any vectors. Worked example D below uses these numbers.

7. Explosions and recoil

An explosion is a collision run backward. The pieces start together (often at rest) and fly apart. Internal forces do all the pushing, so momentum is conserved, but kinetic energy increases: it comes from chemical energy, a compressed spring or your muscles.

Starting from rest: 0 = m₁v₁ + m₂v₂  ⇒  v₂ = −(m₁/m₂)v₁

That minus sign is the recoil. A 4.0 kg rifle firing a 0.010 kg bullet at 400 m/s kicks back at (0.010 × 400)/4.0 = 1.0 m/s. Equal and opposite momenta, very unequal speeds: the light piece gets almost all the kinetic energy.

8. The ballistic pendulum: momentum first, energy second

A bullet is fired into a hanging block, sticks, and the block swings up to height h. It is the classic two-stage problem, and the classic trap.

Ballistic pendulum in two stagesA block hangs from two strings. A bullet approaches from the left and sticks in it. Stage 1, the collision, conserves momentum. The block then swings to the right and rises a height h above its starting point. Stage 2, the swing, conserves mechanical energy. h 1: hit (momentum)2: swing (energy)
Stage 1 is a perfectly inelastic collision. Stage 2 is a pendulum swing with no collision in it.
  1. The hit (momentum): m·vbullet = (m + M)V. Kinetic energy is not conserved here; most of it becomes heat in the wood.
  2. The swing (energy): ½(m + M)V² = (m + M)gh, so V = √(2gh). No collision happens during the swing, and the string does no work, so energy is fine here.
  3. Put them together: vbullet = [(m + M)/m]·√(2gh).

Using ½mv² = (m + M)gh across both stages at once is the single most common ballistic-pendulum mistake. It gives a bullet speed that is far too small.

9. Which equation do I use?

Use each row that applies. If motion is in two dimensions, split every momentum equation into x and y parts.

  1. Is a force acting over a time, or is there a force–time graph?

    Use impulse: FΔt = Δp, or area under the graph = Δp.

  2. Do the objects stick together, or move off “as one”?

    Perfectly inelastic: m₁v₁ + m₂v₂ = (m₁ + m₂)vf in 1D; use components in 2D. Don’t conserve KE.

  3. Does something start at rest and fly apart (explosion, recoil, throwing, a spring pushing two carts)?

    Total momentum before is 0: 0 = m₁v₁ + m₂v₂.

  4. Does the problem say “elastic”, or that kinetic energy is conserved?

    1D: use the elastic formulas (or momentum + the relative-speed rule). 2D: momentum in x and y, plus KE.

  5. None of those, but you know the velocities after?

    Use momentum to find the missing velocity, then the KE check to classify the collision.

  6. Is there motion before or after the collision (a swing, a slide, a drop)?

    Split it into stages. Momentum for the collision only; energy or kinematics for the other parts.

  7. Is it not along one line?

    Write one momentum equation for x and one for y.

10. Worked examples, with a before-and-after ledger

Each example writes the momentum of every object in a small table before and after, then checks the answer two ways.

Example B: a rear-end crash (perfectly inelastic)

A 1200 kg car moving at 15 m/s rear-ends an 1800 kg car moving at 5.0 m/s in the same direction. The bumpers lock. How fast do they move just after, and how much kinetic energy is lost?

Example B momentum ledger (forward is +)
ObjectMass (kg)v before (m/s)p before (kg·m/s)p after (kg·m/s)
Car 11200+15+18,0003000 vf
Car 21800+5.0+9,000
Total3000+27,000+27,000
  1. Momentum: 27,000 = 3000 vf, so vf = 9.0 m/s forward.
  2. KE before: ½(1200)(15²) + ½(1800)(5.0²) = 135,000 + 22,500 = 157,500 J.
  3. KE after: ½(3000)(9.0²) = 121,500 J.
  4. Lost: 157,500 − 121,500 = 36,000 J, about 23%. It went into crushed metal, heat and sound.

Check: 9.0 m/s sits between 5.0 and 15, closer to the heavier car’s speed. That makes sense.

Example C: a head-on elastic bounce (watch the signs)

A 0.50 kg cart moving right at 4.0 m/s collides elastically with a 1.5 kg cart moving left at 2.0 m/s. Find both velocities afterward.

  1. Right is +: v₁ = +4.0 m/s and v₂ = −2.0 m/s. The minus sign is the most important number in the problem.
  2. v₁′ = [(0.50 − 1.5)(4.0) + 2(1.5)(−2.0)] / 2.0 = (−4.0 − 6.0)/2.0 = −5.0 m/s (5.0 m/s to the left).
  3. v₂′ = [(1.5 − 0.50)(−2.0) + 2(0.50)(4.0)] / 2.0 = (−2.0 + 4.0)/2.0 = +1.0 m/s (1.0 m/s to the right).
Example C ledger (right is +)
Objectp beforep afterKE beforeKE after
0.50 kg cart+2.0−2.54.0 J6.25 J
1.5 kg cart−3.0+1.53.0 J0.75 J
Total−1.0−1.07.0 J7.0 J

Check: momentum −1.0 = −1.0 and KE 7.0 J = 7.0 J, so it really is elastic. Relative speed: they approach at 4.0 − (−2.0) = 6.0 m/s and separate at 1.0 − (−5.0) = 6.0 m/s.

Example D: two pucks at right angles (2D, they stick)

On frictionless ice, a 2.0 kg puck slides east at 3.0 m/s and a 3.0 kg puck slides north at 2.0 m/s. They collide and stick. Find their velocity afterward.

  1. x (east): 2.0 × 3.0 + 3.0 × 0 = 5.0 vₓ, so vₓ = 6.0/5.0 = 1.2 m/s.
  2. y (north): 2.0 × 0 + 3.0 × 2.0 = 5.0 vy, so vy = 6.0/5.0 = 1.2 m/s.
  3. Speed: √(1.2² + 1.2²) ≈ 1.70 m/s. Direction: tan θ = 1.2/1.2 = 1, so 45° north of east.

Check: KE drops from ½(2.0)(9.0) + ½(3.0)(4.0) = 15 J to ½(5.0)(1.70²) ≈ 7.2 J. Less after, as it must be when objects stick.

Example E: ballistic pendulum, start to finish

A 10.0 g bullet embeds itself in a 2.00 kg block hanging on strings. The block swings up 12.0 cm. How fast was the bullet going?

  1. Work backward from the swing (energy): V = √(2gh) = √(2 × 9.8 × 0.120) = √2.352 ≈ 1.534 m/s.
  2. Then the hit (momentum): 0.0100 v = (2.01)(1.534), so v ≈ 308 m/s.
  3. How much KE survived the hit? KE before ≈ ½(0.0100)(308²) ≈ 475 J. KE after = ½(2.01)(1.534²) ≈ 2.36 J. Only about 0.5% is left, which is exactly m/(m + M) = 0.0100/2.01.

Check: if you had used energy straight through, ½(0.0100)v² = 2.36 J gives v ≈ 22 m/s, far too slow for a bullet. That is the mistake from section 8.

Try 3 days free

3 days, unrestricted access. No card needed.

11. Sign mistakes (and other ways to lose points)

  • Forgetting the minus on a velocity going the “wrong” way. Choose + once, at the start, and give every leftward or downward velocity a minus sign, before and after.
  • Subtracting speeds for a bounce. A ball hitting a wall at 8 m/s and bouncing back at 6 m/s has Δv = 14 m/s, not 2 m/s.
  • Dropping a sign the formula gives you. If the elastic formula says v₁′ = −5.0 m/s, the cart bounced back. Report the direction, don’t erase the minus.
  • Conserving kinetic energy when objects stick after approaching at different velocities. Some KE is lost. Use momentum for the collision.
  • Using energy across the ballistic-pendulum collision. Momentum for the hit, energy for the swing.
  • Adding 2D momenta as plain numbers. Perpendicular momenta add like the sides of a right triangle.
  • Choosing a system that leaves out a colliding object. Then the collision force is external and momentum isn’t conserved.
  • Mass in grams. Convert 5.0 g to 0.0050 kg before plugging in, especially when kg and g appear in the same problem.

12. Practice problems

15 problems: momentum and impulse, 1D and 2D collisions, recoil, the ballistic pendulum and two concept checks. Type a number in the unit shown next to the box (no need to type the unit), or pick an option. Answers within 2% count, so 3 significant figures is plenty. A wrong answer tells you the likely slip.

Problem 1 of 15

1. A 0.145 kg baseball moves at 40 m/s. What is the size of its momentum?

kg·m/s

Show solution 1
  1. p = mv.
  2. p = (0.145 kg)(40 m/s) = 5.8 kg·m/s.
  3. Momentum has a direction too: 5.8 kg·m/s in the direction the ball moves.

Problem 2 of 15

2. A force on a soccer ball rises steadily from 0 to 500 N in 2.0 ms, stays at 500 N for 4.0 ms, then falls steadily back to 0 in 2.0 ms. What impulse does the ball get?

N·s

Show solution 2
  1. Impulse J = area under the F–t graph.
  2. Flat top: 500 N × 0.0040 s = 2.0 N·s.
  3. Each ramp is a triangle: ½ × 500 N × 0.0020 s = 0.50 N·s. Two of them make 1.0 N·s.
  4. J = 2.0 + 1.0 = 3.0 N·s. If the 0.45 kg ball started at rest, it leaves at 3.0/0.45 ≈ 6.7 m/s.

Problem 3 of 15

3. A 0.20 kg ball hits a wall moving at 8.0 m/s and bounces straight back at 6.0 m/s. What is the size of its change in momentum?

kg·m/s

Show solution 3
  1. Take “away from the wall” as +, so v₀ = −8.0 m/s and v = +6.0 m/s.
  2. Δp = m(v − v₀) = 0.20 × (6.0 + 8.0) = 0.20 × 14 = 2.8 kg·m/s.
  3. Bouncing back always gives a bigger Δp than just stopping (which would be 1.6 kg·m/s).

Problem 4 of 15

4. The ball in problem 3 is touching the wall for 0.035 s. What average force does the wall exert on it?

N

Show solution 4
  1. F_avg Δt = Δp.
  2. F_avg = 2.8 kg·m/s ÷ 0.035 s = 80 N.
  3. Direction: the same as Δp, away from the wall.

Problem 5 of 15

5. A 70 kg skater gliding at 4.0 m/s grabs a 50 kg skater who is standing still, and they move off together. How fast do they move?

m/s

Show solution 5
  1. Ice is nearly frictionless, so the two-skater system has no net horizontal external force.
  2. Before: p = 70 × 4.0 + 50 × 0 = 280 kg·m/s.
  3. After: (70 + 50)v = 280, so v = 2.33 m/s, in the first skater’s direction.

Problem 6 of 15

6. How much kinetic energy is lost when the skaters in problem 5 grab on?

J

Show solution 6
  1. KE before = ½ × 70 × 4.0² = 560 J.
  2. KE after = ½ × 120 × (2.333)² ≈ 326.7 J.
  3. Lost = 560 − 326.7 ≈ 233 J, about 42%. It goes into heat, sound and the skaters’ muscles.

Problem 7 of 15

7. A 2.0 kg cart moving at +6.0 m/s hits a 4.0 kg cart at rest. The collision is elastic. What is the 4.0 kg cart’s velocity afterward?

m/s

Show solution 7
  1. Cart 2 starts at rest, so v₂ = 2m₁v₁/(m₁ + m₂).
  2. v₂ = (2 × 2.0 × 6.0)/(2.0 + 4.0) = 24/6.0 = +4.0 m/s.
  3. Check momentum: before 2.0 × 6.0 = 12; after 2.0(−2.0) + 4.0(4.0) = 12. Equal.

Problem 8 of 15

8. In problem 7, what is the 2.0 kg cart’s velocity after the collision? Keep the sign (+ is its original direction).

m/s

Show solution 8
  1. v₁ = (m₁ − m₂)v₁/(m₁ + m₂) = (−2.0)(6.0)/6.0 = −2.0 m/s.
  2. KE check: before ½(2.0)(36) = 36 J; after ½(2.0)(4) + ½(4.0)(16) = 4 + 32 = 36 J. Elastic, as promised.
  3. Relative-speed check: they approached at 6.0 m/s and separate at 4.0 − (−2.0) = 6.0 m/s.

Problem 9 of 15

9. A 60 kg astronaut floating at rest throws a 3.0 kg wrench away. The wrench moves at 5.0 m/s relative to the astronaut’s original rest frame. How fast does the astronaut drift the other way?

m/s

Show solution 9
  1. System: astronaut + wrench. Nothing outside pushes on it.
  2. p before = 0, so 0 = (3.0)(+5.0) + (60)v.
  3. v = −15/60 = −0.25 m/s. Speed 0.25 m/s, opposite the throw.

Problem 10 of 15

10. A 5.0 kg object at rest explodes into two pieces. The 2.0 kg piece flies east at 9.0 m/s. What is the velocity of the 3.0 kg piece? Take east as + and keep the sign.

m/s

Show solution 10
  1. p before = 0 (at rest).
  2. 0 = 2.0 × 9.0 + 3.0v, so 3.0v = −18.
  3. v = −6.0 m/s: 6.0 m/s west. Kinetic energy is created here (81 + 54 = 135 J) from the chemical energy of the explosion.

Problem 11 of 15

11. A 1500 kg car going east at 20 m/s collides with a 2500 kg truck going north at 10 m/s, and they lock together. How fast is the wreck moving just after the crash?

m/s

Show solution 11
  1. x: pₓ = 1500 × 20 = 30,000 kg·m/s, so vₓ = 30,000/4000 = 7.50 m/s.
  2. y: py = 2500 × 10 = 25,000 kg·m/s, so vy = 25,000/4000 = 6.25 m/s.
  3. v = √(7.50² + 6.25²) ≈ 9.76 m/s.

Problem 12 of 15

12. For the wreck in problem 11, what angle does its velocity make north of east?

degrees

Show solution 12
  1. tan θ = vy/vₓ = 6.25/7.50 = 0.833.
  2. θ = tan⁻¹(0.833) ≈ 39.8° north of east.
  3. Sense check: the car’s east momentum (30,000) is bigger than the truck’s north momentum (25,000), so the angle is under 45°.

Problem 13 of 15

13. A 5.0 g bullet moving at 400 m/s hits a 1.0 kg wooden block hanging on strings and stays inside it (a ballistic pendulum). How high does the block swing?

cm

Show solution 13
  1. Collision (momentum): 0.0050 × 400 = (1.005)v, so v ≈ 1.990 m/s.
  2. Swing (energy): ½(1.005)v² = (1.005)gh, so h = v²/(2g) = 3.960/19.6 ≈ 0.202 m.
  3. h ≈ 20.2 cm. Only about 0.5% of the bullet’s KE survives the hit.

Problem 14 of 15

14. A ball falls freely toward the ground. Is the ball’s momentum conserved?

Show solution 14
  1. Ask: what is my system, and does a net external force act on it?
  2. Ball alone: gravity (from Earth) is external, so the ball’s momentum grows downward.
  3. Ball + Earth: gravity is now internal, so the total is conserved.

Problem 15 of 15

15. A 1.0 kg cart at 4.0 m/s hits an identical cart at rest. Afterward the first cart moves at 1.0 m/s and the second at 3.0 m/s, same direction. What kind of collision is this?

Show solution 15
  1. Momentum before = 1.0 × 4.0 = 4.0 kg·m/s; after = 1.0 + 3.0 = 4.0. Conserved.
  2. KE before = ½ × 1.0 × 16 = 8.0 J; after = ½(1) + ½(9) = 0.5 + 4.5 = 5.0 J.
  3. KE dropped but the carts separated, so the collision is inelastic, not perfectly inelastic.
Answer key (all 15)
  1. 5.8 kg·m/s
  2. 3.0 N·s
  3. 2.8 kg·m/s
  4. 80 N
  5. 2.33 m/s
  6. 233 J
  7. +4.0 m/s
  8. −2.0 m/s
  9. 0.25 m/s
  10. −6.0 m/s (6.0 m/s west)
  11. 9.76 m/s
  12. 39.8° north of east
  13. 20.2 cm
  14. No: gravity is external to the ball
  15. Inelastic (not perfectly inelastic)

FAQ

When is momentum conserved?

Total momentum of a system stays constant when the net external force on that system is zero. In many short collisions or explosions, outside forces have little effect during the impact, so momentum just before is approximately equal to momentum just after.

What is the difference between elastic and inelastic collisions?

Momentum is conserved in both. In an elastic collision kinetic energy is also conserved. In an inelastic collision some kinetic energy turns into heat, sound or deformation. If objects with different velocities stick together, the collision is perfectly inelastic and loses the most kinetic energy possible for those starting conditions.

Is kinetic energy ever conserved in a perfectly inelastic collision?

If the objects approach at different velocities and stick, kinetic energy decreases. If they already had the same velocity, there is no relative motion to lose, so kinetic energy does not change. For a closed system, total momentum is conserved in either case.

What happens when equal masses collide elastically head-on?

They swap velocities. If a moving ball hits an identical ball at rest, the first ball stops and the second leaves with the first ball’s velocity, like a cue ball hitting another pool ball dead center.

Why can’t I use energy conservation for the whole ballistic pendulum?

The bullet sticking in the block is a perfectly inelastic collision, so most of the kinetic energy turns into heat and deformation. Use momentum for the hit to get the shared speed, then energy for the swing up.

How is impulse related to momentum?

Impulse is force times the time it acts, J = FΔt, or the area under a force–time graph. The impulse–momentum theorem says the impulse on an object equals its change in momentum, J = Δp.

Where to go next

Keep practicing

Try 3 days free

3 days, unrestricted access. No card needed.

Sources and fact checks

Definitions, the impulse–momentum theorem, the conservation condition, the collision types, the 1D elastic results and the 2D component method were checked against OpenStax University Physics Volume 1, chapter 9 (Linear Momentum and Collisions). The ballistic pendulum method was also checked against Physics LibreTexts. The problems and numbers were written for this guide, and every answer was recomputed separately.