PhysicsDrill

Circular motion · 17 checked problems

Uniform circular motion practice problems: centripetal acceleration and force

Something moving in a circle at a steady speed is still accelerating, because its direction keeps changing. Every circular-motion problem in Physics 1 comes down to one move: add up the real forces that point toward the center and set that total equal to mv²/r.

Step 1

Find the center and r. Where is the center of the circle the object is actually tracing? Measure r from there.

Step 2

Draw only real forces. Tension, gravity, normal force, friction. No “centripetal force” arrow, no centrifugal arrow.

Step 3

Inward is positive. ΣFin = mv²/r. Then use ΣF = 0 in the direction perpendicular to the plane of the circle.

Constant speed, but still accelerating

Uniform circular motion means moving around a circle at a constant speed. The word that trips people up is “constant.” The speed is constant, but the velocity is not, because velocity includes direction and the direction changes every instant.

Any change in velocity is an acceleration. Look at the arrows below: at every point the velocity is tangent to the circle, and the change needed to turn it always points straight at the center. That inward acceleration is called centripetal (“center-seeking”) acceleration.

Velocity and acceleration around a circleAn object moves counterclockwise around a circle. At the top, left, bottom and right of the circle, a blue velocity arrow points along the circle (tangent to it) and an orange acceleration arrow points straight at the center. center vava
Blue: velocity, tangent to the circle. Orange: acceleration, always toward the center. The two are at right angles, so the acceleration turns the object without speeding it up.

If the acceleration had any part along the velocity, the object would speed up or slow down. In uniform circular motion it doesn’t, so the acceleration is purely sideways to the motion: toward the center.

Period, frequency and speed

Most problems give you how often something goes around instead of its speed. These four lines translate between them:

T

Period: seconds for one full turn.

f = 1/T

Frequency: turns per second (Hz).

v = 2πr/T

Speed: one circumference per period.

ω = 2π/T, v = ωr

Angular speed ω in rad/s.

Example: a point 0.20 m from the center of a spinning disc that turns 4 times per second has f = 4.0 Hz, T = 0.25 s and v = 2π(0.20)/0.25 = 5.0 m/s.

Centripetal acceleration: a = v²/r

ac = v²/r = ω²r = 4π²r/T²   (toward the center)

The three forms are the same thing. Use v²/r when you know the speed, and 4π²r/T² when you know the period (it is just v = 2πr/T substituted in). Two quick sanity checks:

  • Double the speed, four times the acceleration. Speed is squared.
  • Same speed, tighter circle, bigger acceleration. That is why sharp turns are harder to take fast than wide ones.

Centripetal force is a job, not a new force

Newton’s second law says a net force causes that acceleration: ΣFin = mac = mv²/r. “Centripetal force” is just the name for that net inward force. It is never a separate push or pull. Some real force, or combination of forces, has to do the job:

Who supplies the inward force?
SituationReal force that points inwardInward equation
Ball on a string, horizontal circle on a tableTensionT = mv²/r
Car on a flat curveStatic friction from the roadfs = mv²/r
Car on a frictionless banked curveHorizontal part of the normal forceN sin θ = mv²/r
Top of a vertical loopGravity plus the track’s push (both down)N + mg = mv²/r
Bottom of a vertical loopNormal force minus gravityN − mg = mv²/r
Conical pendulumHorizontal part of the tensionT sin θ = mv²/r
Satellite in a circular orbitGravityGMm/r² = mv²/r

If you’re unsure which forces to draw, the free body diagram practice guide walks through it one object at a time.

Six setups and their free-body diagrams

Almost every exam problem is one of these. For each, the force arrows show the forces on the object; any velocity arrow is labeled v. The dashed line or label shows where the center is.

Where is the centrifugal force?

On a sharp turn you feel thrown outward, so it’s tempting to draw an outward “centrifugal” arrow. Don’t. In the ground’s frame, which is the one your course uses for free-body diagrams, no object is pushing you outward.

What you feel: pushed toward the outside door.

What is happening: your body keeps trying to go in a straight line (Newton’s first law). The car turns under you until the door or seat pushes you inward. That inward push is the real force, and it’s the one on the diagram.

A quick test: if a string breaks, the ball flies off along the tangent, not straight outward. An outward force would send it outward. Centrifugal force only shows up if you analyze the motion from inside the rotating frame, where it is a “fictitious” force that is not caused by any object. Leave it off inertial free-body diagrams.

Unit and radius traps

Most lost points in this chapter aren’t physics mistakes. They’re r or unit mistakes. Run through this before you plug in:

Check these before you calculate
TrapFixExample
The problem gives a diameterr = d/2A 0.60 m wheel (across) has r = 0.30 m.
Speed in km/hDivide by 3.6 to get m/s90 km/h = 25 m/s
Spin rate in rpmω = rpm × 2π/60 (rad/s), then v = ωr300 rpm = 31.4 rad/s
Height above the ground for an orbitr = Earth’s radius + altitude400 km up: r = 6.371 × 10⁶ + 4.0 × 10⁵ m
Period in minutes or hoursConvert to seconds before using 4π²r/T²92 min = 5520 s
Conical pendulum given string length Lr is horizontal: r = L sin θL = 1.0 m at 30°: r = 0.50 m
Calculator in radian modeUse degree mode for tan⁻¹ on bank anglestan⁻¹(0.459) = 24.7°, not 0.43

Worked examples

All use g = 9.8 m/s². Each ends with a check you can do in your head.

Example A: tension from a period

A 0.50 kg ball on a 1.2 m string whirls in a horizontal circle on a frictionless table, once every 0.80 s. Find its speed, its acceleration and the string tension.

  1. The center is the end of the string, so r = 1.2 m.
  2. v = 2πr/T = 2π(1.2)/0.80 = 9.42 m/s.
  3. a = v²/r = 9.42²/1.2 = 74.0 m/s² toward the center. (Same as 4π²r/T² = 4π²(1.2)/0.80² = 74.0 m/s².)
  4. Tension is the only horizontal force: T = ma = 0.50 × 74.0 = 37.0 N.

Check: 74 m/s² is about 7.5 g, so the string tension should be about 7.5 times the ball’s weight (4.9 N). 7.5 × 4.9 ≈ 37 N. ✓

Example B: fastest speed on a flat curve

A car takes a flat curve of radius 50 m. The tires and road have μₛ = 0.70. What is the top speed before it slides, in m/s and km/h?

  1. Forces: weight down, normal force up, static friction toward the center.
  2. Vertical: N = mg, so the most friction can give is μₛmg.
  3. Inward: μₛmg = mv²/r. The mass cancels: v = √(μₛgr).
  4. v = √(0.70 × 9.8 × 50) = √343 = 18.5 m/s.
  5. In km/h: 18.5 × 3.6 = 66.7 km/h.

Check: the mass canceled, so a heavy truck and a light car with the same tires have the same top speed on the curve. On a wet road (smaller μₛ) the top speed drops. ✓

Example C: designing a banked curve

Engineers want cars at 90 km/h to round a curve of radius 120 m with no help from friction. What bank angle do they need?

  1. Convert: 90 km/h ÷ 3.6 = 25 m/s.
  2. Forces: weight down, normal force perpendicular to the road. No friction.
  3. Vertical: N cos θ = mg. Inward: N sin θ = mv²/r.
  4. Divide: tan θ = v²/(rg) = 25²/(120 × 9.8) = 625/1176 = 0.531.
  5. θ = tan⁻¹(0.531) = 28.0°.

Check: faster design speed or a tighter curve both make v²/(rg) bigger, so the bank gets steeper, which matches race tracks. ✓

Example D: a roller-coaster loop, top and bottom

A 60 kg rider goes around a vertical loop of radius 10 m. At the top the speed is 14 m/s, and at the bottom it is 22 m/s. Find the seat’s normal force at each point and the minimum speed at the top.

  1. Top (center is below): N + mg = mv²/r, so N = m(v²/r − g) = 60(14²/10 − 9.8) = 60(19.6 − 9.8) = 588 N.
  2. Bottom (center is above): N − mg = mv²/r, so N = m(g + v²/r) = 60(9.8 + 22²/10) = 60(9.8 + 48.4) = 3492 N ≈ 3.5 kN.
  3. Minimum speed at the top: set N = 0, so mg = mv²/r and v = √(gr) = √(9.8 × 10) = 9.90 m/s.

Check: the rider’s weight is 588 N, so at the top they feel their normal weight (upside down), and at the bottom about 6 times it. 14 m/s is above the 9.90 m/s minimum, so N at the top is positive, as it must be. ✓

Example E: a satellite in low Earth orbit

A satellite circles 400 km above Earth’s surface. Earth’s radius is 6.371 × 10⁶ m and GM = 3.986 × 10¹⁴ m³/s². Find its speed and its period.

  1. Radius from Earth’s center: r = 6.371 × 10⁶ + 0.400 × 10⁶ = 6.771 × 10⁶ m.
  2. Gravity is the inward force: GMm/r² = mv²/r, so v = √(GM/r).
  3. v = √(3.986 × 10¹⁴ / 6.771 × 10⁶) = √(5.887 × 10⁷) = 7.67 × 10³ m/s.
  4. T = 2πr/v = 2π(6.771 × 10⁶)/7673 = 5545 s ≈ 92.4 minutes.

Check: the International Space Station orbits at about this height and goes around Earth about every 92 minutes. ✓

Try 3 days free

3 days, unrestricted access. No card needed.

Practice problems

17 problems in three rounds. Type a number in the unit shown next to the box (no need to type the unit), or pick an option. Use g = 9.8 m/s². Answers within 2% count, so 3 significant figures is plenty. A wrong answer tells you the likely slip, and every problem has a full solution.

Round 1: speed, period and acceleration

Get the motion right first. No forces yet.

Problem 1 of 17

1. A carousel horse sits 4.0 m from the center. The carousel makes one turn every 12 s. How fast is the horse moving?

m/s

Show solution 1
  1. One lap is the circumference: 2πr = 2π(4.0 m) = 25.1 m.
  2. It takes one period, 12 s.
  3. v = 25.1 m / 12 s = 2.09 m/s.

Answer: v = 2πr/T = 2π(4.0)/12 = 2.09 m/s.

Problem 2 of 17

2. A car drives at a steady 15 m/s around a circular track of radius 60 m. What is the size of its centripetal acceleration?

m/s²

Show solution 2
  1. a = v²/r.
  2. a = (15 m/s)² / 60 m = 225/60 = 3.75 m/s².
  3. Direction: toward the center of the track.

Answer: a = v²/r = 15²/60 = 225/60 = 3.75 m/s², toward the center.

Problem 3 of 17

3. A wheel 0.60 m across (that is its diameter) spins at 300 rpm. How fast is a point on the rim moving?

m/s

Show solution 3
  1. Radius: r = 0.60/2 = 0.30 m.
  2. ω = 300 rev/min × 2π rad/rev ÷ 60 s/min = 31.4 rad/s.
  3. v = ωr = 31.4 × 0.30 = 9.42 m/s.
  4. Same answer another way: 300 rpm is 5 turns per second, so v = 5 × 2π(0.30) = 9.42 m/s.

Answer: r = 0.30 m, ω = 300 × 2π/60 = 31.4 rad/s, v = ωr = 31.4 × 0.30 = 9.42 m/s.

Problem 4 of 17

4. A Ferris wheel of radius 25 m turns once every 60 s. What is the centripetal acceleration of a rider?

m/s²

Show solution 4
  1. v = 2πr/T = 2π(25)/60 = 2.62 m/s.
  2. a = v²/r = 2.62²/25 = 0.274 m/s².
  3. Or in one step: a = 4π²r/T² = 39.48 × 25 / 3600 = 0.274 m/s².

Answer: a = 4π²r/T² = 4π²(25)/60² = 0.274 m/s². That is under 3% of g, which is why a Ferris wheel feels gentle.

Problem 5 of 175. Seen from above, a car drives counterclockwise around a circular track at constant speed. At the instant it is at the easternmost point of the track, it is moving north. Which way does its acceleration point?

Show solution 5
  1. At the easternmost point, the center of the circle is due west.
  2. In uniform circular motion the acceleration always points to the center.
  3. So the acceleration points west, at right angles to the northward velocity.

Answer: West, toward the center of the track.

Round 2: what pulls inward on flat ground and banks

Draw the real forces, pick inward as positive, and set the net inward force equal to mv²/r.

Problem 6 of 17

6. A 0.40 kg puck on a frictionless air table is tied to a string and moves in a horizontal circle of radius 0.75 m at 3.0 m/s. What is the tension in the string?

N

Show solution 6
  1. Vertical: the table’s normal force cancels the weight.
  2. Horizontal (inward): only tension. T = mv²/r.
  3. T = (0.40 kg)(3.0 m/s)² / 0.75 m = 3.6/0.75 = 4.8 N.

Answer: T = mv²/r = 0.40 × 3.0² / 0.75 = 4.8 N.

Problem 7 of 17

7. A car takes a flat (unbanked) curve of radius 40 m. The coefficient of static friction between tires and road is 0.50. What is the fastest it can go without sliding?

m/s

Show solution 7
  1. On flat ground, N = mg, so the most static friction can give is μₛmg.
  2. Friction is the inward force: μₛmg = mv²/r.
  3. The mass cancels: v = √(μₛgr) = √(0.50 × 9.8 × 40) = √196 = 14.0 m/s.

Answer: v_max = √(μₛgr) = √(0.50 × 9.8 × 40) = √196 = 14.0 m/s (about 50 km/h).

Problem 8 of 17

8. A driver takes a flat curve of radius 80 m at 72 km/h. What is the smallest coefficient of static friction that keeps the car on the curve?

(no unit)

Show solution 8
  1. 72 km/h ÷ 3.6 = 20 m/s.
  2. Friction supplies the inward force: μₛmg = mv²/r, so μₛ = v²/(rg).
  3. μₛ = 20² / (80 × 9.8) = 400/784 = 0.51.

Answer: v = 72/3.6 = 20 m/s, μₛ = v²/(rg) = 400/(80 × 9.8) = 0.51.

Problem 9 of 17

9. A highway curve of radius 200 m is banked so cars at 30 m/s need no friction at all. What is the bank angle?

°

Show solution 9
  1. Vertical: N cos θ = mg.
  2. Inward: N sin θ = mv²/r.
  3. Divide: tan θ = v²/(rg) = 30² / (200 × 9.8) = 900/1960 = 0.459.
  4. θ = tan⁻¹(0.459) = 24.7°.

Answer: tan θ = v²/(rg) = 900/(200 × 9.8) = 0.459, θ = 24.7°.

Problem 10 of 17

10. A conical pendulum: a small ball on a string moves in a horizontal circle of radius 0.50 m while the string makes 30° with the vertical. How fast is the ball going?

m/s

Show solution 10
  1. Vertical: T cos 30° = mg.
  2. Inward: T sin 30° = mv²/r.
  3. Divide: tan 30° = v²/(rg).
  4. v = √(0.50 × 9.8 × 0.577) = √2.83 = 1.68 m/s.

Answer: v = √(rg tan θ) = √(0.50 × 9.8 × tan 30°) = √2.83 = 1.68 m/s.

Problem 11 of 1711. A car rounds a flat, unbanked curve at constant speed. Which force supplies the centripetal force?

Show solution 11
  1. List the forces: weight (down), normal force (up), friction from the road.
  2. Weight and normal force are vertical and cancel.
  3. Only friction can point sideways toward the center. The tire patch isn’t sliding sideways, so it is static friction.

Answer: Static friction from the road on the tires, pointing toward the center.

Round 3: loops and orbits

Up is not always positive. Point the positive direction at the center.

Problem 12 of 17

12. A 50 kg rider goes through the top of a roller-coaster loop of radius 8.0 m, upside down, at 12 m/s. What normal force does the seat exert on the rider?

N

Show solution 12
  1. At the top the center is straight down. Both N and mg point down, toward the center.
  2. N + mg = mv²/r.
  3. N = m(v²/r − g) = 50(144/8.0 − 9.8) = 50(8.2) = 410 N.

Answer: N = mv²/r − mg = 50(12²/8.0 − 9.8) = 50(18 − 9.8) = 410 N.

Problem 13 of 17

13. The same 50 kg rider passes the bottom of a loop of radius 8.0 m at 18 m/s. What normal force acts on the rider there?

N

Show solution 13
  1. At the bottom the center is straight up. N points up (in), mg points down (out).
  2. N − mg = mv²/r.
  3. N = m(g + v²/r) = 50(9.8 + 324/8.0) = 50(50.3) = 2515 N ≈ 2.5 kN.

Answer: N = mg + mv²/r = 50(9.8 + 18²/8.0) = 50(9.8 + 40.5) = 2515 N, about 5 times the rider’s weight.

Problem 14 of 17

14. What is the minimum speed a cart needs at the top of a loop of radius 12 m to stay on the track?

m/s

Show solution 14
  1. Slowest possible: the track is just barely touching, so N = 0.
  2. Then gravity alone is the inward force: mg = mv²/r.
  3. v = √(gr) = √(9.8 × 12) = 10.8 m/s. The mass cancels.

Answer: v_min = √(gr) = √(9.8 × 12) = √117.6 = 10.8 m/s.

Problem 15 of 17

15. A satellite orbits 3.6 × 10⁶ m above Earth’s surface. Earth’s radius is 6.37 × 10⁶ m and GM for Earth is 3.99 × 10¹⁴ m³/s². What is the satellite’s orbital speed?

m/s

Show solution 15
  1. r is measured from Earth’s center: r = 6.37 × 10⁶ + 3.6 × 10⁶ = 9.97 × 10⁶ m.
  2. Gravity supplies the inward force: GMm/r² = mv²/r, so v = √(GM/r).
  3. v = √(3.99 × 10¹⁴ / 9.97 × 10⁶) = √(4.00 × 10⁷) = 6.33 × 10³ m/s, about 6.3 km/s.

Answer: r = 9.97 × 10⁶ m, v = √(GM/r) = √(3.99 × 10¹⁴ / 9.97 × 10⁶) = 6.33 × 10³ m/s.

Problem 16 of 1716. A cart goes over the top of a loop at exactly the minimum speed √(gr). Which forces act on it at that instant?

Show solution 16
  1. At the top, inward is down, so N + mg = mv²/r.
  2. With v² = gr, mv²/r = mg, so N = 0.
  3. Gravity alone does the whole job of the centripetal force.

Answer: Gravity only; the track’s normal force is zero.

Problem 17 of 1717. You whirl a ball on a string in a horizontal circle. The string snaps. Seen from above, how does the ball move right after that?

Show solution 17
  1. Once the string breaks there is no horizontal force on the ball.
  2. With no net force (seen from above), the ball keeps its velocity: Newton’s first law.
  3. Its velocity at that instant was tangent to the circle, so it moves off along the tangent. Its distance from the center grows, but not because anything pushes it out.

Answer: It moves in a straight line along the tangent, in the direction it was moving when the string broke.

FAQ

Why is an object in uniform circular motion accelerating if its speed is constant?

Acceleration is any change in velocity, and velocity includes direction. Going around a circle, the direction of motion changes all the time, so the velocity changes even though the speed does not. That change points toward the center of the circle, with size v²/r.

What is the formula for centripetal acceleration?

a = v²/r, pointing toward the center. If you know the period T instead of the speed, use v = 2πr/T, which gives a = 4π²r/T². With angular speed ω in rad/s, a = ω²r.

Is centripetal force a real force?

Centripetal force is not a separate kind of force. It is the name for the net inward force, and something real has to supply it: tension, gravity, a normal force, friction, or a mix. On a free-body diagram you draw those real forces, never an extra arrow labeled centripetal force.

Why is centrifugal force not on a free-body diagram?

In an inertial (non-accelerating) frame, nothing pushes an object outward. The outward feeling comes from your body trying to keep going in a straight line while the seat or door pushes you inward. Centrifugal force only appears if you analyze the problem from inside the rotating frame, which intro physics courses don't do on free-body diagrams.

What is the minimum speed at the top of a vertical loop?

At the minimum speed the track or string pushes with zero force at the top, so gravity alone supplies the centripetal force: mg = mv²/r, which gives v = √(gr). The mass cancels, so the answer depends only on the loop radius.

How do you find the angle of a banked curve with no friction?

Draw the normal force perpendicular to the road. Its horizontal part, N sin θ, supplies the centripetal force and its vertical part, N cos θ, balances the weight. Dividing the two equations gives tan θ = v²/(rg).

Where to go next

Keep practicing

Try 3 days free

3 days, unrestricted access. No card needed.

Sources and fact checks

The definitions, v = 2πr/T, a = v²/r, the idea that centripetal force is the net inward force, the banked-curve result tan θ = v²/(rg), the loop and conical-pendulum setups, fictitious forces and circular-orbit speed v = √(GM/r) were checked against OpenStax University Physics Volume 1 (sections 4.4, 6.3 and 13.4) and OpenStax College Physics 2e (chapter 6). The problems and numbers were written for this guide, and every answer was recomputed separately.